Bearing sleeve - H210 DPI
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
H210 DPI: Mounting component for securing a tapered-bore bearing on a cylindrical shaft. H210 DPI is an adapter sleeve, not a plain bearing.
Product identification
- Designation: H210
- Manufacturer: DPI
- Component type: Adapter sleeve
- d1: 45 mm
- d: 50 mm
- B1: 35 mm
- d2: 70 mm
- b2: 12 mm
- Catalogue bearing combination: 1210K
Shaft diameter is 45 mm and nominal bearing bore 50 mm. Sleeve length is 35 mm. The 70 mm assembly outside dimension relates to the nut side, not bearing outside diameter. The 12 mm dimension is a separate axial drawing measurement, not bearing width.
DPI lists H210 in combination with bearing 1210K. This identifies a catalogue arrangement, not inclusion of the bearing with the sleeve. Retain the full bearing designation; nominal bore alone is insufficient.
Selecting the bearing and adjacent parts
The sleeve forms the connection between the cylindrical shaft and the tapered inner-ring bore. Select the bearing by its complete designation and mounting dimensions.
Mounting and bearing selection
Before mounting, check the shaft, tapered surfaces, thread and longitudinal slit. Driving the bearing up the taper affects both the fit and internal clearance. Follow the procedure and checking method specified for the bearing; nut tightening force alone does not confirm correct mounting.
Exact version identification
The H series differs in design and use from AH or AHX withdrawal sleeves. The same shaft diameter does not establish interchangeability. Compare the full designation, thread, length, matching nut and locking element. Dimensions of a similar version are no substitute for the drawing.
Servicing and remounting
During dismounting, also inspect the shaft and bearing seats. A new sleeve does not repair a damaged seating surface or a worn bearing. Restore the specified axial retention when reassembling. Load capacity, operating speed and lubrication of the complete arrangement depend on the selected bearing and service conditions, not on the sleeve alone.
Additional parameters
| Category: | Adapter sleeves |
|---|---|
| Weight: | 0.276 kg |
| Component type: | Adapter sleeve |
| d1: | 45 mm |
| d: | 50 mm |
| B1: | 35 mm |
| d2: | 70 mm |
| b2: | 12 mm |
| Catalogue bearing combination: | 1210K |
Product rating
Be the first who will post an article to this item!
We can source almost any DPI product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about DPI productsDPI – Product range and selection
We can help identify the required version of a DPI product from the complete designation and available documentation.
Examples from our catalogue
- 6208 DPI
- UC 207 DPI
- 6003 2Z DPI
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.