Bearing sleeve - H2309 DPI
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
H2309 DPI: Mounting component for securing a tapered-bore bearing on a cylindrical shaft. H2309 DPI is an adapter sleeve, not a plain bearing.
H2309 / H209 DPI
H2309 and H209 DPI share a 40 mm shaft diameter, 45 mm nominal bearing bore and 65 mm outside dimension over the nut. Their lengths differ: H2309 has L = 50 mm, H209 B1 = 33 mm. Retain the full designation and check axial space for the actual bearing and sleeve.
Product identification
- Designation: H2309
- Manufacturer: DPI
- Component type: Adapter sleeve
- d₀: 40 mm
- d: 45 mm
- L: 50 mm
- D: 65 mm
- a: 11 mm
- d_z: M45×1.5
- Taper: 1:12
Shaft diameter is 40 mm and nominal bearing bore 45 mm. Sleeve length is 50 mm. The 65 mm assembly outside dimension relates to the nut side, not bearing outside diameter. The 11 mm dimension is a separate axial drawing measurement, not bearing width.
Thread and associated components
Thread d_z M45×1.5 has a nominal thread diameter of 45 mm and a pitch of 1.5 mm. It is not the 40 mm shaft diameter. The nut must match the actual thread and its function in the arrangement; a similar sleeve from another brand does not establish the nut or washer designation.
Selecting the bearing and adjacent parts
The sleeve forms the connection between the cylindrical shaft and the tapered inner-ring bore. Select the bearing by its complete designation and mounting dimensions.
Mounting and bearing selection
Before mounting, check the shaft, tapered surfaces, thread and longitudinal slit. Driving the bearing up the taper affects both the fit and internal clearance. Follow the procedure and checking method specified for the bearing; nut tightening force alone does not confirm correct mounting.
Exact version identification
The H series differs in design and use from AH or AHX withdrawal sleeves. The same shaft diameter does not establish interchangeability. Compare the full designation, thread, length, matching nut and locking element. Dimensions of a similar version are no substitute for the drawing.
Servicing and remounting
During dismounting, also inspect the shaft and bearing seats. A new sleeve does not repair a damaged seating surface or a worn bearing. Restore the specified axial retention when reassembling. Load capacity, operating speed and lubrication of the complete arrangement depend on the selected bearing and service conditions, not on the sleeve alone.
Additional parameters
| Category: | Adapter sleeves |
|---|---|
| Weight: | 0.298 kg |
| Component type: | Adapter sleeve |
| d₀: | 40 mm |
| d: | 45 mm |
| L: | 50 mm |
| D: | 65 mm |
| a: | 11 mm |
| d_z: | M45×1.5 |
| Taper: | 1:12 |
Product rating
Be the first who will post an article to this item!
We can source almost any DPI product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about DPI productsDPI – Product range and selection
We can help identify the required version of a DPI product from the complete designation and available documentation.
Examples from our catalogue
- 6208 DPI
- UC 207 DPI
- 6003 2Z DPI
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.