Bearing sleeve - H3144 FAG

Not rated Rating details
€661,61 / pcs €546,79 excl. VAT Measure price:
Available to order – we will confirm availability
Delivery to:
25. 11. 2026
Delivery options
Quantity discount
1 - 4 pcs
€661,61 / pcs
5 - 9 pcs = discount 3 %
€641,76 / pcs
10 - 24 pcs = discount 6 %
€621,91 / pcs
25 - 49 pcs = discount 9 %
€602,07 / pcs
50 and more pcs = discount 12 %
€582,22 / pcs
You save €0

H3144 FAG is an adapter sleeve for mounting a tapered-bore bearing on a cylindrical shaft.

Detailed information

Product detailed description

H3144 FAG is an adapter sleeve for mounting a tapered-bore bearing on a cylindrical shaft.

Technical data

  • Designation: H3144 FAG
  • Type: Adapter sleeve

Complete designation and accessory selection

Retain the complete H3144 FAG designation and compare the original part or its drawing. Check the actual shaft diameter, tapered bearing seat, sleeve length and thread, including pitch. The nut outside diameter is not the bearing bore diameter. When ordering, distinguish a bare sleeve from a set with a nut and lock washer; confirm the supply contents and matching accessories for this exact item. The same size designation from another brand does not by itself establish all dimensions or set contents.

How the adapter sleeve works

The cylindrical sleeve bore seats on the shaft, while the external taper carries a bearing with a matching tapered bore. Tightening the nut moves the inner ring along the taper and produces the required grip on the shaft. Bearing radial clearance changes at the same time. An adapter sleeve permits mounting on plain or stepped shafts; axial location and load transfer must be assessed for the complete arrangement.

Mounting and clearance checks

Before mounting, check the cleanliness and condition of the shaft, taper, thread and bearing bore. Prepare contact surfaces and select the procedure according to the instructions for the fitted bearing. Drive the ring on evenly and apply mounting force without transmitting it through the rolling elements. Verify the fit using the specified method, for example radial clearance or axial displacement measurement appropriate to the bearing type. The sleeve designation alone does not establish a universal tightening torque or number of nut turns.

Dismounting and reuse

Release the locking device before loosening the nut. The bearing can move suddenly when the tapered joint releases; retain the specified stop and follow the mounting instructions. Dismounting force should pass through the appropriate ring or abutment. Before remounting, inspect threads, seating surfaces and locking parts; increased tightening is not a remedy for damaged components.

Difference from a withdrawal sleeve

An H-series adapter sleeve has its thread at the smaller end of the taper. AH, AHX and AOH withdrawal sleeves work differently and have the thread at the larger end. Matching shaft diameter alone therefore does not establish interchangeability.

Lubrication and operating data

The sleeve is a mounting component with no rolling elements or cage of its own. Determine permissible load, speed, operating clearance, sealing and lubrication for the fitted bearing and the complete arrangement. Mounting oil does not replace the bearing’s operating lubricant.

Additional parameters

Category: Adapter sleeves
Weight: 14.5 kg
Designation: H3144 FAG
Type: Adapter sleeve

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field

We can source almost any FAG product, even if you cannot find it in our online shop.

Send us the product designation and quantity required. We will check the price, availability and delivery options.

Enquire about FAG products

FAG – Product range and selection

The FAG range includes, for example: ball bearings, cylindrical and spherical roller bearings, tapered roller bearings.

Examples from our catalogue

  • HCB 7006 CTP4SDUL FAG
  • B7007 E 2RSD T P4S UL FAG
  • UKP218-J7 FAG

What to include in your enquiry

  • The full product designation, including all suffixes and specifications.
  • The quantity required and, if relevant, when you need the part.
  • Nameplate details, dimensions or a description of the application if the designation is unknown.

You can email a photo or drawing to info@Loziska-Policka.cz.

Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.

Choose FAG bearings by the complete designation, including suffixes. The required design and operating conditions matter alongside the bearing dimensions.

Compare the complete specification

Check bore, outside diameter, width, internal clearance and the specified shielding or sealing. For a replacement, include the machine application and a photograph of the original marking.

Is a dimensionally identical bearing enough?

Verify the complete specification before substituting a bearing. Different suffixes can identify different designs; a similar reference alone does not confirm suitability.

Request a FAG quotation · Select bearings by designation or size

Availability and any replacement will be confirmed for the specific item.

Manufacturing company : Schaeffler Technologies AG & Co. KG
Address : Industriestraße 1–3, 91074 Herzogenaurach, Germany
E-mail : info@schaeffler.com