Bearing unit - SY 25 TF/VA201 SKF
Related products
80 × 102 × 38.5 mm
SKF FYTB 508 M separate two-bolt oval flanged cast iron housing for an insert bearing; the insert bearing is not included.
UCFL 205 CRAFT
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part. Unit dimensions: 25 mm (inner diameter), 130 mm (mounting-hole spacing) and 31 mm (width).
UCFL 205 CRAFT for a 25 mm shaft: spacing a=130 mm, e=99 mm, width B=34.1 mm, M14 mounting; UC205 insert and FL205 housing.
UCFC 208 BBC – d = 40 mm; four-bolt round flange; L = 145 mm; J = 120 mm.
UL208 NTN
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part. Bearing dimensions: 40 × 80 × 23 mm (inner diameter × outer diameter × width).
62 × 108 × 32.5 mm
SKF FY 506 M separate four-bolt square flanged cast iron housing for an insert bearing; the insert bearing is not included.
UCF 210 MTM
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
Product detailed description
Our e-shop values your trust and wants to provide you with the best shopping experience possible. Detailed information about this product (Bearing Housing Unit SY 25 TF/VA201 SKF) is not yet available. If you would like more product specifications such as dimensions, weight, material or any other details, please feel free to contact us. Our professional customer support team is available and ready to provide you with all the information you need to make a purchase decision.Additional parameters
| Category: | Bearing housings |
|---|---|
| EAN: | 7316571382432 |
d 30 × H 42,9 × L 165 × J 121 × A 48 mm | N 17 × N1 20 mm
UCP 206 D1 DPI is a cast-iron UCP200 pillow block unit for a 30 mm shaft with a UC206D1 insert bearing, grease fitting and two set screws.
FYTB 30 TF SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
TECH_NOTE_FYTB30Two-hole oval flanged cast-iron SKF FYTB 30 TF unit for a 30 mm shaft; H 141.5 mm, J 116.5 mm, L 83 mm, holes N 11.5 mm.
UCFC 207 neu
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
UCP 205 FSY
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
The HFH SNL 519-616 is a split plummer block housing designed to securely accommodate bearings, ensuring optimal performance and extended service life.
d 40 × H 49,2 × L 184 × J 137 × A 54 mm | N 17 × N1 21 mm
P 208 LBC
P 208 LBC is a cast-iron plummer block unit with a long base for a 40 mm shaft, UC 208 insert bearing, set-screw locking and M14 mounting bolts.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any SKF product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
SKF – product identification and supply
The SKF designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | AB SKF (publ) |
|---|---|
| Address : | Sven Wingquists Gata 2, SE-415 50 Göteborg, Sweden |
| E-mail : | skf.cz@skf.com |