Bearing housings, Page 611

The SKF FNL 518 B is a robust, non-split flanged bearing housing designed for through-shaft applications. Constructed from cast iron, it offers reliable support and protection for bearings, enhancing their service life and reducing maintenance needs. This housing is ideal for applications without horizontal frames, providing a simple and effective solution for bearing support.

d 30 · A 21 · H 98 · H2 41 · L 274 mm
Complete SNR UCSP206 conveyor-belt tensioner bearing unit with cast-iron SP206-207/62 housing, UC206G2 insert and R1/8" lubrication.

d 40 · L 145 · J 120 · A 23 · A2 29.2 · H3 100 mm
Complete four-bolt flanged SNR UCFCE208 bearing unit with cast-iron housing, UC208G2 insert and M6×1 lubrication.

Dimensions of the bearing: 20×47×31.1 mm (inner diameter × outer diameter × width)

INA RASEY20-JIS pillow-block unit for a 20 mm shaft; H=33.3 mm, J=95 mm, L=127 mm, A=38 mm, approx. 0.63 kg, GYE20-KRR-B-FA107 insert. Verify the variant.

d 40 × L 184 × B1 56.3 mm
Complete two-bolt pillow block unit NTN M-UELP208D1 with cast-iron housing P208D1, UEL208D1 insert bearing and eccentric locking collar.

d 50 × D 90 × C 20 mm | B2 43,73 mm | s1 11,04 mm | d2 69,90 mm | r 1,00 mm
1350 50 EC RHP is a Self-Lube insert bearing from the 1300EC series with a parallel outside diameter and an eccentric collar lock for a 50 mm shaft.

40 × 80 × 39.5 mm
INA GAY 40 NPP-B single-row insert ball bearing with two grub screws, spherical outer ring and seals on both sides.

H 148 × J 117 × L 80 × A 31 × A1 13 × N 16 × e 18 mm
USFL206: d 30 × A2 40,0 × B 30 × S 8
UKFL206H: d 25 × A2 38,5 × B 25 × B1 38 × s1 20,5 · G M6×1

L 240 × H3 170 × J 200 × J1 141,4 × N 23 mm
A1 42 × A2 18 × A3 16 × M20
FC 216 FYH · A4 62,5 × B1 78 (UKFC216) · A4 67,3 × B 82,6 × S 33,3 (UCFC216)

H 142 × J 116,5 × L 80 × A 29 mm
PCJT30 / RCJT30: d 30 mm · těleso CJT06 z litiny · 2 montážní otvory