Bearing unit - 1350 50 EC RHP
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
QVCW28V130SEM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 130 mm; H = 26.2 mm; D = 266.7 mm; C = 190.0 mm; Sv = 147.8 mm
UCP 212 NTN is a pillow block bearing unit for a 60 mm shaft. Two set screws lock the bearing to the shaft; the designation without D1 identifies the maintenance-free version.
This KUVAL product carries the complete designation S 613. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCP 213 JIB is a complete pillow block bearing unit for a 65 mm shaft. It combines bearing UC213 with cast-iron housing P213; set-screws lock the inner ring to the shaft.
FYTB 506 M SKF by SKF: flanged bearing housing (oval flange).
Dimensions according to drawing: L = 83 mm; J = 116.5 mm; H = 141.5 mm; N = 11.5 mm; Da = 76.2 mm; A1 = 32.5 mm
This INA product carries the complete designation MNE 11. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCFL 205 KBS by KBS: flange bearing unit (oval flange).
Dimensions according to drawing: Shaft diameter: 25 mm; L = 68 mm; J = 99 mm; H = 130 mm; A = 27 mm
UCFC 210 ASAHI is a four-bolt round flanged bearing unit with a locating spigot for a 50 mm shaft. Two set screws secure it to the shaft.
SY 508 M SKF by SKF: pillow block bearing housing.
Dimensions according to drawing: L = 175 mm; J = 135.5 mm; H = 99 mm; A = 48 mm; H2 = 19 mm; H1 = 49.2 mm
QMPF30J600ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 6 in.; L = 201.7 mm; J = 24 mm; H = 76.2 mm; A = 169.9 mm; B = 330.2 mm; K = 75.9 mm
UCP 208 DPI is a complete pillow block bearing unit for a 40 mm shaft. It combines bearing UC208 with cast-iron housing P208; set-screws lock the inner ring to the shaft.
RASEY 20 JIS INA by INA: pillow block bearing unit. Shaft diameter: 20 mm; set-screw locking.
FYTB 30 TF SKF by SKF: flange bearing unit (oval flange).
Dimensions according to drawing: Shaft diameter: 30 mm; L = 83 mm; J = 116.5 mm; H = 141.5 mm; B = 38.1 mm; N = 11.5 mm; Da = 76.2 mm
Product detailed description
1350 50 EC RHP by RHP: radial insert ball bearing.
Technical specifications
- Designation: 1350 50 EC RHP
- Manufacturer: RHP
- Shaft diameter: 50 mm
- D: 90.000 mm
- C: 20.00 mm
- Shaft locking: eccentric locking collar
- Sealing: single-lip seal
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 0.25 kg |
UCFL 206 ASAHI is a complete flanged bearing unit for a 30 mm shaft. It combines bearing UC206 with cast-iron housing FL206 and locks to the shaft using set-screws.
SN 510 SLB is a split plummer block housing for an arrangement with a separately selected bearing.
UCFC 216 FYH is a four-bolt round flanged bearing unit with a locating spigot for an 80 mm shaft. Two set screws secure it to the shaft.
QMCW30J600ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 6 in.; J = 24 mm; B.C. = 419.1 mm; H = 26.2 mm; D = 304.8 mm; N = 128.5 mm; E = 209.6 mm
QMSN30J140SN by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 140 mm; L = 202 mm; J = 30 mm; H = 76 mm; A = 170 mm; B = 330 mm; K = 76 mm
UCP 205 CRAFT by CRAFT: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 25 mm; B = 34.1 mm; h = 36.5 mm; a = 140 mm; e = 105 mm; b = 38 mm; s1 = 13 mm
F 208 NTN is a one-piece cast iron bearing housing with a square flange and four fixing holes. It is a housing for assembling a bearing arrangement; F 208 alone does not designate a complete UCF208 unit.
QVPX28V125SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 125 mm; L = 175.0 mm; J = 24 mm; H = 50.8 mm; A = 155.6 mm; B = 293.4 mm; E = 108.0 mm
Complete pillow block unit for a 60 mm shaft, with set-screw locking and open-end cast dust covers. The C prefix forms part of this specific version.
Separate oval two-bolt flange housing for assembling an arrangement with a bearing insert.
Cast-iron plummer block housing for an insert bearing, 240 mm long with 190 mm mounting centres. Supplied without the insert bearing.
UCF 208 BBC by BBC: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 40 mm; a = 130 mm; e = 102 mm; i = 21 mm; g = 16 mm; l = 36 mm; s = 14 mm
This EU-ROLL product carries the complete designation SN 512. When replacing a part, compare its complete marking and brand with the assembly documentation.
SY 509 M SKF by SKF: pillow block bearing housing.
Dimensions according to drawing: L = 187 mm; J = 143.5 mm; H = 107.5 mm; A = 48 mm; H2 = 21 mm; H1 = 54 mm
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any RHP product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
RHP – product identification and supply
The RHP designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.