ST40S
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
Complete pillow block unit for a 60 mm shaft, with set-screw locking and open-end cast dust covers. The C prefix forms part of this specific version.
This KUVAL product carries the complete designation S 616. When replacing a part, compare its complete marking and brand with the assembly documentation.
SN 510 SLB is a split plummer block housing for an arrangement with a separately selected bearing.
SY 509 M SKF by SKF: pillow block bearing housing.
Dimensions according to drawing: L = 187 mm; J = 143.5 mm; H = 107.5 mm; A = 48 mm; H2 = 21 mm; H1 = 54 mm
This KUVAL product carries the complete designation S 509. When replacing a part, compare its complete marking and brand with the assembly documentation.
Split plummer block housing SN 510 CX. Shaft diameter: 45 mm; D = 90 mm.
UCF 207 ASAHI is a complete flanged bearing unit for a 35 mm shaft. It combines bearing UC207 with cast-iron housing F207 and locks to the shaft using set-screws. The square flange has four fixing holes.
RCJTY 20 N INA by INA: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 20 mm; L = 61 mm; H = 112 mm; N = 11.5 mm; A1 = 10 mm
UCFC 207 neu: flange bearing unit (round flange).
Dimensions according to drawing: Shaft diameter: 35 mm; L = 135 mm; J = 110 mm; A = 34 mm; B = 42.9 mm; N = 14 mm; J1 = 77.8 mm
UCP 213 JIB is a complete pillow block bearing unit for a 65 mm shaft. It combines bearing UC213 with cast-iron housing P213; set-screws lock the inner ring to the shaft.
FYTB 30 TF SKF by SKF: flange bearing unit (oval flange).
Dimensions according to drawing: Shaft diameter: 30 mm; L = 83 mm; J = 116.5 mm; H = 141.5 mm; B = 38.1 mm; N = 11.5 mm; Da = 76.2 mm
This KUVAL product carries the complete designation S 617. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCFL 205 KBS by KBS: flange bearing unit (oval flange).
Dimensions according to drawing: Shaft diameter: 25 mm; L = 68 mm; J = 99 mm; H = 130 mm; A = 27 mm
UCP 206 BBC by BBC: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 30 mm; h = 42.9 mm; a = 160 mm; e = 121 mm
This KUVAL product carries the complete designation S 609. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCP 212 NTN is a pillow block bearing unit for a 60 mm shaft. Two set screws lock the bearing to the shaft; the designation without D1 identifies the maintenance-free version.
Product detailed description
ST40S by RHP: take-up bearing unit.
Technical specifications
- Designation: ST40S
- Manufacturer: RHP
- Shaft diameter: 40 mm
- Housing material: cast iron
- Shaft locking: concentric locking collar
- Inner ring length: short inner ring
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 2.7 kg |
This KUVAL product carries the complete designation S 516. When replacing a part, compare its complete marking and brand with the assembly documentation.
SY 40 TF SKF by SKF: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 40 mm; L = 175 mm; J = 135.5 mm; H = 99 mm; A = 48 mm; H2 = 19 mm; H1 = 49.2 mm
P 210 SNR by SNR: bearing housing.
Dimensions according to drawing: L = 206 mm; J = 159 mm; H = 57.2 mm; A = 60 mm; H2 = 114 mm; H1 = 22 mm
UCF 209 DPI is a square flanged bearing unit for a 45 mm shaft. Shaft locking: set screws.
UCP 205 CRAFT by CRAFT: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 25 mm; B = 34.1 mm; h = 36.5 mm; a = 140 mm; e = 105 mm; b = 38 mm; s1 = 13 mm
FY 50 FM SKF by SKF: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 50 mm; L = 143 mm; J = 111 mm; N = 18 mm; Da = 125.4 mm; T = 60.7 mm; A1 = 43 mm
RASEY 20 JIS INA by INA: pillow block bearing unit. Shaft diameter: 20 mm; set-screw locking.
Separate oval two-bolt flange housing for assembling an arrangement with a bearing insert. H = 197 mm; J = 157 mm; L = 115 mm.
UCP 210 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 50 mm; h = 57.2 mm; a = 206 mm; e = 159 mm; b = 60 mm; S1 = 20 mm; S2 = 23 mm
DV 308 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 308 A designation, mounting arrangement and bearing seat.
UCFC 208 BBC by BBC: flange bearing unit (round flange).
Dimensions according to drawing: Shaft diameter: 40 mm; a = 145 mm; p = 120 mm
This KUVAL bearing housing carries the complete designation S 512. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCFC 216 FYH is a four-bolt round flanged bearing unit with a locating spigot for an 80 mm shaft. Two set screws secure it to the shaft.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any RHP product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
RHP – product identification and supply
The RHP designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.