ST80
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
UCP 213 JIB is a complete pillow block bearing unit for a 65 mm shaft. It combines bearing UC213 with cast-iron housing P213; set-screws lock the inner ring to the shaft.
SNG 515 612 GLH is a split plummer block housing for an arrangement with a separately selected bearing.
P 210 SNR by SNR: bearing housing.
Dimensions according to drawing: L = 206 mm; J = 159 mm; H = 57.2 mm; A = 60 mm; H2 = 114 mm; H1 = 22 mm
QVPX28V125SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 125 mm; L = 175.0 mm; J = 24 mm; H = 50.8 mm; A = 155.6 mm; B = 293.4 mm; E = 108.0 mm
This NTN product carries the complete designation UCCFC 212. When replacing a part, compare its complete marking and brand with the assembly documentation.
Split plummer block housing SN 510 CX. Shaft diameter: 45 mm; D = 90 mm.
UCF 208 MSC by MSC: flange bearing unit (square flange). Shaft diameter: 40 mm.
UCP 213 DPI is a pillow-block bearing unit for a 65 mm shaft. Insert bearing: UC213; Housing: P213.
P 204 J NTN is a standalone pillow-block housing for a matching insert bearing.
UCFC 210 ASAHI is a four-bolt round flanged bearing unit with a locating spigot for a 50 mm shaft. Two set screws secure it to the shaft.
UCP 208 DPI is a complete pillow block bearing unit for a 40 mm shaft. It combines bearing UC208 with cast-iron housing P208; set-screws lock the inner ring to the shaft.
SY 509 M SKF by SKF: pillow block bearing housing.
Dimensions according to drawing: L = 187 mm; J = 143.5 mm; H = 107.5 mm; A = 48 mm; H2 = 21 mm; H1 = 54 mm
F 208 NTN is a one-piece cast iron bearing housing with a square flange and four fixing holes. It is a housing for assembling a bearing arrangement; F 208 alone does not designate a complete UCF208 unit.
Product detailed description
ST80 by RHP: take-up bearing unit.
Technical specifications
- Designation: ST80
- Manufacturer: RHP
- Shaft diameter: 80 mm
- L: 231.5 mm
- L1: 139.5 mm
- L2: 20.5 mm
- L3: 32.0 mm
- L4: 125.0 mm
- L5: 74.0 mm
- H: 184.0 mm
- H1: 113.0 mm
- H2: 70.0 mm
- H3: 165.1 mm
- N: 42.0 mm
- A: 70.0 mm
- Series: ST
- Housing material: cast iron
- Shaft locking: set-screw locking
- Sealing: single-lip seal
- Lubrication: grease lubrication
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 9 kg |
| Délka domku (mm): | 231.5 |
| Shaft diameter (mm): | 80 |
| Šířka domku v ose hřídele (mm): | 70 |
| Šířka ložiskové části jednotky (mm): | 82.6 |
| Výška domku (mm): | 184 |
UCFL 206 ASAHI is a complete flanged bearing unit for a 30 mm shaft. It combines bearing UC206 with cast-iron housing FL206 and locks to the shaft using set-screws.
UCP 201 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 12 mm; h = 30.2 mm; a = 127 mm; e = 95 mm; b = 38 mm; S1 = 13 mm; S2 = 19 mm
This STEYR product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 510. When replacing a part, compare its complete marking and brand with the assembly documentation.
Split plummer block housing SNH 512 610 SKF. Da = 110 mm; L = 255 mm; J = 210 mm.
UCP 204 IB is a complete bearing and housing unit with a 20 mm bore, standard Y-bearing sealing identified as 2F, and standard lubrication.
This EU-ROLL product carries the complete designation SN 512. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCF 208 BBC by BBC: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 40 mm; a = 130 mm; e = 102 mm; i = 21 mm; g = 16 mm; l = 36 mm; s = 14 mm
Separate oval two-bolt flange housing for assembling an arrangement with a bearing insert. H = 197 mm; J = 157 mm; L = 115 mm.
This INA product carries the complete designation MNE 11. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 616. When replacing a part, compare its complete marking and brand with the assembly documentation.
RASEY 25 XL N INA by INA: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 25 mm; L = 130 mm; J = 103 mm; H = 36.5 mm; A = 36 mm; H1 = 14.5 mm; A1 = 21 mm
Split plummer block housing SN 513 DPI. Shaft diameter: 60 mm; L = 275 mm.
QMPG30J140ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 140 mm; L = 198.6 mm; J = 24 mm; H = 76.2 mm; A = 170.0 mm; B = 332.2 mm; K = 75.9 mm
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any RHP product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
RHP – product identification and supply
The RHP designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.