Bearing unit - UCP 208 DPI
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
This KUVAL product carries the complete designation S 617. When replacing a part, compare its complete marking and brand with the assembly documentation.
DV 211 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 211 A designation, mounting arrangement and bearing seat.
This KUVAL product carries the complete designation S 508. When replacing a part, compare its complete marking and brand with the assembly documentation.
FYC 508 SKF by SKF: flanged bearing housing (round flange).
Dimensions according to drawing: L = 145 mm; J = 120 mm; N = 14 mm; Da = 100 mm; A1 = 36 mm; A3 = 10 mm
DV 210 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 210 A designation, mounting arrangement and bearing seat.
UCFC 213 ASAHI is a round flanged bearing unit with spigot joint for a 65 mm shaft. Shaft locking: set screws.
P 210 SNR by SNR: bearing housing.
Dimensions according to drawing: L = 206 mm; J = 159 mm; H = 57.2 mm; A = 60 mm; H2 = 114 mm; H1 = 22 mm
QMPH30J515SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 5 15⁄16 in.; L = 201.7 mm; J = 24 mm; H = 85.9 mm; A = 179.4 mm; B = 339.9 mm; K = 75.9 mm
FYTB 30 TF SKF by SKF: flange bearing unit (oval flange).
Dimensions according to drawing: Shaft diameter: 30 mm; L = 83 mm; J = 116.5 mm; H = 141.5 mm; B = 38.1 mm; N = 11.5 mm; Da = 76.2 mm
This ZKL product carries the complete designation UCSG 205. When replacing a part, compare its complete marking and brand with the assembly documentation.
Cast-iron plummer block housing for an insert bearing, 240 mm long with 190 mm mounting centres. Supplied without the insert bearing.
This NTN product carries the complete designation UCFL 204 J. When replacing a part, compare its complete marking and brand with the assembly documentation.
QMMC30J140ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 140 mm; A = 19.8 mm; B = 38.1 mm; D = 5.6 mm; S = 192.0 mm; C = 205.0 mm; G = 154.4 mm
Split plummer block housing SN 510 CX. Shaft diameter: 45 mm; D = 90 mm.
UCFC 210 ASAHI is a four-bolt round flanged bearing unit with a locating spigot for a 50 mm shaft. Two set screws secure it to the shaft.
Product detailed description
UCP 208 DPI is a complete pillow block bearing unit for a 40 mm shaft. It combines bearing UC208 with cast-iron housing P208; set-screws lock the inner ring to the shaft.
Construction and mating parts
The unit combines a sealed ball bearing with a pillow block housing. The bearing's spherical outside surface allows mounting misalignment to be accommodated in the housing seat. This does not permit operation with an arbitrarily deflected shaft: check the alignment of all support positions during installation. When replacing the insert alone, check the lubrication-hole and groove alignment as well as shaft diameter.
Dimensions and version selection
- Designation: UCP 208 DPI
- Type: Pillow block bearing unit
- Shaft diameter d: 40 mm
- Housing material: Cast iron
- Shaft locking: Set-screws
- Bearing: UC208
- Housing: P208
- Catalogue dimension H: 49.2 mm
- Catalogue dimension J: 137 mm
- Catalogue dimension A: 52 mm
- Catalogue dimension N: 17 mm
- Catalogue dimension N₁: 21 mm
- Catalogue dimension H₁: 18 mm
- Catalogue dimension H₀: 98 mm
- Catalogue dimension S: 19 mm
- Catalogue dimension B: 49.2 mm
- Housing mounting bolts: M12
The pillow block has two fixing slots in its base. Centre height H locates the shaft axis above the mounting surface; pitch J refers to housing fixings, not inner-ring screws. Bearing width B differs from base width. When replacing a unit, also check clearance around the grease fitting and access to the set-screws.
Mounting
Slide the unit onto a clean shaft without impact, with the set-screws fully released. Seat the base on a flat, rigid support. Align the support positions before locking the inner ring. Base bolts secure the housing to the machine; set-screws lock the bearing to the shaft. Their sizes and tightening torques are not interchangeable. Check free rotation and proper seating after mounting.
Lubrication and operation
The sealed bearing has a grease reserve and the unit permits relubrication. Select grease and service intervals for speed, temperature and contamination.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 1.9 kg |
| Designation: | UCP 208 DPI |
| Type: | Pillow block bearing unit |
| Shaft diameter d: | 40 mm |
| Housing material: | Cast iron |
| Shaft locking: | Set-screws |
| Bearing: | UC208 |
| Housing: | P208 |
| Catalogue dimension H: | 49.2 mm |
| Catalogue dimension J: | 137 mm |
| Catalogue dimension A: | 52 mm |
| Catalogue dimension N: | 17 mm |
| Catalogue dimension N₁: | 21 mm |
| Catalogue dimension H₁: | 18 mm |
| Catalogue dimension H₀: | 98 mm |
| Catalogue dimension S: | 19 mm |
| Catalogue dimension B: | 49.2 mm |
| Housing mounting bolts: | M12 |
UCF 208 ASAHI is a four-bolt square flanged bearing unit for a 40 mm shaft. Two set screws secure the bearing to the shaft.
Split plummer block housing SN 513 DPI. Shaft diameter: 60 mm; L = 275 mm.
UCP 205 CRAFT by CRAFT: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 25 mm; B = 34.1 mm; h = 36.5 mm; a = 140 mm; e = 105 mm; b = 38 mm; s1 = 13 mm
UCP 201 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 12 mm; h = 30.2 mm; a = 127 mm; e = 95 mm; b = 38 mm; S1 = 13 mm; S2 = 19 mm
SNG 515 612 GLH is a split plummer block housing for an arrangement with a separately selected bearing.
QVCW28V415SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 4 15⁄16 in.; H = 26.2 mm; D = 266.7 mm; C = 190.0 mm; Sv = 147.8 mm
This NTN product carries the complete designation UCCFC 212. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCFC 207 ASAHI is a complete flanged bearing unit for a 35 mm shaft. It combines bearing UC207 with cast-iron housing FC207 and locks to the shaft using set-screws. The round flange has four fixing holes and a locating spigot.
MFC40 RHP by RHP: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 40 mm; L = 133.4 mm; J = 111.1 mm; H = 92.1 mm; G = 10 mm
UCP 207 CRAFT by CRAFT: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 35 mm; B = 42.9 mm; h = 47.6 mm; a = 167 mm; e = 127 mm; b = 48 mm; s1 = 17 mm
UCF 208 BBC by BBC: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 40 mm; a = 130 mm; e = 102 mm; i = 21 mm; g = 16 mm; l = 36 mm; s = 14 mm
UCF 205 ASAHI is a complete flanged bearing unit for a 25 mm shaft. It combines bearing UC205 with cast-iron housing F205 and locks to the shaft using set-screws. The square flange has four fixing holes.
UCP 212 NTN is a pillow block bearing unit for a 60 mm shaft. Two set screws lock the bearing to the shaft; the designation without D1 identifies the maintenance-free version.
Product rating
Be the first who will post an article to this item!
We can source almost any DPI product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about DPI productsDPI – Product range and selection
We can help identify the required version of a DPI product from the complete designation and available documentation.
Examples from our catalogue
- 6208 DPI
- UC 207 DPI
- 6003 2Z DPI
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.