18685/18620D
Product detailed description
Tapered roller bearing assembly. Manufacturer: TIMKEN. Designation: 18685/18620D. Price for 1 piece.
Bearing - 7320 BECMB SKF
100 × 215 × 47 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 30212 A ZVL
60 × 110 × 23.75 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 6306 TB FAG
30 × 72 × 19 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 6000 2RSH SKF
10 × 26 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 61903 2RS ZVL
17 × 30 × 7 mm. Rubber seals on both sides. Thin-section ZVL single-row deep groove ball bearing for installations with limited radial space.
Bearing - 624 P5 TPX ZKL
4 × 13 × 5 mm. bearing with increased P5 precision. Catalogue brand: TPX; compare the complete designation and physical marking before replacement.
Bearing - 6200 Z ZKL
10 × 30 × 9 mm. single-row deep groove ball bearing with a non-contact metal shield on one side. Suitable for radial and moderate axial loads in both directions when one side of the bearing needs protection from coarse contamination.
Bearing - NU 22 32 EN C6 ZKL
NU 22/32 EN C6 ZKL ZKL cylindrical roller bearing with a specific complete designation. Mounting dimensions are not stated in the available product data; verify them from the original bearing before ordering.
Bearing - 6307 2RS1 SKF
35 × 80 × 21 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.
Bearing - 6305 2Z C3 GJN SKF
25 × 62 × 17 mm. Single-row SKF Explorer 6305-2Z/C3GJN deep groove ball bearing with non-contact sheet-steel shields on both sides and C3 radial internal clearance. The grease-lubricated design is suitable for high rotational speeds.
Bearing - 6405 SKF
25 × 72 × 19 mm. Rolling bearing for use in machinery and equipment.
Bearing - 6000 SKF
10 × 26 × 8 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 609 2Z ZKL
9 × 24 × 7 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any TIMKEN product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
TIMKEN – product identification and supply
The TIMKEN designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | Timken Europe |
|---|---|
| Address : | 2 Rue Timken, 68002 Colmar Cedex, France |