Bearing - M88048/M88010 TIMKEN

Bearing - 61800 2RS KINEX

Bearing.

Bearing - 6000 SKF

10 × 26 × 8 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 30209 A KLF-ZVL

45 × 85 × 20.75 mm. tapered roller bearing for combined radial and axial loads.

Bearing - 6306 Z ZKL

30 × 72 × 19 mm. Single-row deep groove ball bearing with a non-contact metal shield on one side. It carries radial and limited axial loads in both directions; the opposite side remains open.

Bearing - 624 P5 TPX ZKL

4 × 13 × 5 mm. bearing with increased P5 precision. Catalogue brand: TPX; compare the complete designation and physical marking before replacement.

Bearing - 6307 2RS1 SKF

35 × 80 × 21 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.

Bearing - 609 2Z ZKL

9 × 24 × 7 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.

Bearing - 30206 A KLF

30 × 62 × 17.25 mm. single-row tapered roller bearing for high radial loads combined with axial load in one direction. The separable design allows the inner ring assembly and outer ring to be mounted independently.

Bearing - 6306 2RS TIMKEN

30 × 72 × 19 mm. Single-row deep-groove ball bearing with contact rubber seals on both sides (2RS). Check the complete designation before ordering.

Bearing - YET 206 SKF

30 × 62 × 38.1 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.