Bearing - R3 2Z neu
Product detailed description
Bearing - R3 2Z neu
Bearing R3 2Z neu.
Verify the exact design and compatibility using the manufacturer designation and application requirements.
Bearing - 30209 A KLF-ZVL
45 × 85 × 20.75 mm. tapered roller bearing for combined radial and axial loads.
Bearing - 6000 2RSH SKF
10 × 26 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 6004 2RS ZVL
20 × 42 × 12 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.
Bearing - 6003 Z ZKL
17 × 35 × 10 mm. single-row deep-groove ball bearing with a non-contact metal shield on one side. The shield limits coarse contamination while retaining low friction and good high-speed capability.
Bearing - 6305 2Z C3 GJN SKF
25 × 62 × 17 mm. Single-row SKF Explorer 6305-2Z/C3GJN deep groove ball bearing with non-contact sheet-steel shields on both sides and C3 radial internal clearance. The grease-lubricated design is suitable for high rotational speeds.
Bearing - 6200 Z ZKL
10 × 30 × 9 mm. single-row deep groove ball bearing with a non-contact metal shield on one side. Suitable for radial and moderate axial loads in both directions when one side of the bearing needs protection from coarse contamination.
Bearing - 6407 N ZVL
35 × 90 × 23 mm. Rolling bearing for use in machinery and equipment.
Bearing - 6307 ZKL
35 × 80 × 21 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.
Bearing - 6215 2RS ZVL
75 × 130 × 25 mm. Bearing with rubber seals on both sides for use in machinery and equipment.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any neu product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
neu – product identification and supply
The neu designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.