neu
We can arrange delivery of almost any neu product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
neu – product identification and supply
The neu designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
Product sorting
List of products
Bearing - 696 2Z neu
6 × 15 × 5 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with reliable radial and moderate axial load support in both directions.
Bearing - 686 ZZ NEU
6 × 13 × 5 mm. NEU bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - F 6003 2RS neu
17 × 35 × 10 mm. neu F 6003 2RS bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against neu documentation and the requirements of the specific application.
Bearing - 11590/11520 NEU
15.875 × 42.862 × 14.288 mm. single-row tapered roller bearing for combined radial and axial load in one direction. The separable cone-and-cup design simplifies mounting and precise adjustment of the bearing arrangement.
Needle roller bearing - HK 1612 neu
16 × 22 × 12 mm. No seal.
Bearing - TR55ZZ HIC0102 neu
12x55x11 HIC bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - GE 56 neu
56 × 85 × 40 mm. neu GE 56 radial spherical plain bearing for oscillating and tilting motion at low sliding speeds. Its spherical sliding surfaces carry radial load and accommodate angular misalignment between the shaft and housing.
d = M50x1.5 mm,
D = 70 mm,
L = 35 mm,
b = 45 mm
Bearing - 6303 2ZV neu
17 × 47 × 14 mm. is a single-row deep-groove ball bearing with metal shields on both sides. It combines low friction, protection against common solid contaminants and support for radial and limited axial loads.
Bearing - SS 6203 2RS neu
17 × 40 × 12 mm. stainless-steel deep-groove ball bearing is a single-row bearing with rubber seals on both sides. The stainless execution improves resistance to moisture and corrosion, while the seals protect the factory grease and bearing interior.
Bearing - CS 210 2RS NEU
50 × 90 × 20 mm. insert ball bearing is a sealed bearing with a 50 mm cylindrical bore and spherical outside surface for installation in a matching housing. Double 2RS contact seals protect the rolling contact area from dust and splashed water while retaining lubricant. When replacing it, also compare the shaft-retention method and housing profile.
Bearing - 3203 2RS neu
17 × 40 × 17 mm. The double-row angular contact ball bearing supports radial loads, axial forces in both directions and tilting moments. Contact rubber seals on both sides help retain grease and protect the raceways from common contaminants. A compact solution for gearboxes, pumps, hubs, agricultural machinery and other positions requiring increased axial rigidity.
Bearing - S 6001 2RS neu
12 × 28 × 8 mm. deep-groove ball bearing is a single-row bearing with contact rubber seals on both sides. It carries radial loads and moderate axial loads in both directions, while the factory grease is protected against leakage and common contaminants.
Bearing - SS 61800 2Z neu
10 × 19 × 5 mm. Steel shields 2Z on both sides.
Bearing - 63001 2RS neu
Rubber seals on both sides.
Bearing - CS 208 2RS neu
Rubber seals on both sides.
Bearing - 51202 neu
15 × 32 × 12 mm. neu 51202 thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
