HM903249-99405

Bearing - 6405 SKF

25 × 72 × 19 mm. Rolling bearing for use in machinery and equipment.

Bearing - 6305 2Z C3 GJN SKF

25 × 62 × 17 mm. Single-row SKF Explorer 6305-2Z/C3GJN deep groove ball bearing with non-contact sheet-steel shields on both sides and C3 radial internal clearance. The grease-lubricated design is suitable for high rotational speeds.

Bearing - 6001 2Z SKF

12 × 28 × 8 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with the ability to carry radial and moderate axial loads in both directions.

Bearing - 6003 Z ZKL

17 × 35 × 10 mm. single-row deep-groove ball bearing with a non-contact metal shield on one side. The shield limits coarse contamination while retaining low friction and good high-speed capability.

Bearing - YET 206 SKF

30 × 62 × 38.1 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.

Bearing - B7006 E 2RSD T P4S UM FAG

30 × 55 × 13 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 30206 A KLF

30 × 62 × 17.25 mm. single-row tapered roller bearing for high radial loads combined with axial load in one direction. The separable design allows the inner ring assembly and outer ring to be mounted independently.

Bearing - 6004 2RS ZVL

20 × 42 × 12 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.