LM742749-902A6

Bearing - 6310 FAG

50 × 110 × 27 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6322 FAG

110 × 240 × 50 mm. Rolling bearing for use in machinery and equipment.

Bearing - 626 2Z FAG

6 × 19 × 6 mm. is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds. The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.

Bearing - 61901 2RS ZVL

12 × 24 × 6 mm. Rubber seals on both sides.

Bearing - 6004 2RS ZVL

20 × 42 × 12 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.

Bearing - 624 P5 TPX ZKL

4 × 13 × 5 mm. bearing with increased P5 precision. Catalogue brand: TPX; compare the complete designation and physical marking before replacement.

Bearing - 6301 2Z ZKL

12 × 37 × 12 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Dynamic load rating 9.8 kN, mass 0.06 kg.

Bearing - 627 ZKL

7 × 22 × 7 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.