NA439SW-90037
Product detailed description
Tapered roller bearing assembly. Manufacturer: TIMKEN. Designation: NA439SW-90037. Price for 1 piece.
Bearing - 6310 FAG
50 × 110 × 27 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 6308 2RS ZVL
40 × 90 × 23 mm. Rubber seals on both sides.
Bearing - 6407 N ZVL
35 × 90 × 23 mm. Rolling bearing for use in machinery and equipment.
Bearing - 6322 FAG
110 × 240 × 50 mm. Rolling bearing for use in machinery and equipment.
Bearing - 6003 Z ZKL
17 × 35 × 10 mm. single-row deep-groove ball bearing with a non-contact metal shield on one side. The shield limits coarse contamination while retaining low friction and good high-speed capability.
Bearing - NJ 1013 M SRO
65 × 100 × 18 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 7320 BECMB SKF
100 × 215 × 47 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - NU 2205 KINEX
25 × 52 × 18 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 6001 2Z SKF
12 × 28 × 8 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with the ability to carry radial and moderate axial loads in both directions.
Bearing - 6202 ZKL
15 × 35 × 11 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.
Bearing - 61800 2RS KINEX
Bearing.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any TIMKEN product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
TIMKEN – product identification and supply
The TIMKEN designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
| Manufacturing company : | Timken Europe |
|---|---|
| Address : | 2 Rue Timken, 68002 Colmar Cedex, France |