VPMC175031

Bearing - 6000 SKF

10 × 26 × 8 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6006 2RS ZVL

30 × 55 × 13 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.

Bearing - 22313 M ZKL

65 × 140 × 48 mm. double-row spherical roller bearing with a solid machined brass cage. Its self-aligning design carries high radial loads, axial loads in both directions and accommodates operating misalignment.

Bearing - 32209 A KLF

Bearing.

Bearing - 30204 A KLF

20 × 47 × 15.25 mm. single-row tapered roller bearing for combined radial and axial loads acting in one direction. Its separable design simplifies installation and accurate clearance adjustment.

Bearing - 6307 ZKL

35 × 80 × 21 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.

Bearing - 30206 A KLF

30 × 62 × 17.25 mm. single-row tapered roller bearing for high radial loads combined with axial load in one direction. The separable design allows the inner ring assembly and outer ring to be mounted independently.

Bearing - 30212 A ZVL

60 × 110 × 23.75 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6306 TB FAG

30 × 72 × 19 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - NU 224 E XL M1 FAG

120 × 215 × 40 mm. FAG bearing with the complete designation. When selecting a replacement, compare the full designation, dimensions and design required for the application.