VPMS900002

Bearing - 6003 Z ZKL

17 × 35 × 10 mm. single-row deep-groove ball bearing with a non-contact metal shield on one side. The shield limits coarse contamination while retaining low friction and good high-speed capability.

Bearing - NU1040-XL-M1 FAG

Bearing - is a single-row cylindrical roller bearing in NU design with a solid brass M1 cage, cylindrical bore, no seals and normal. Cn clearance. It is an X-Life bearing. Dimensions: inner diameter d 200 mm, outer diameter D 310 mm, width B 51 mm; weight 14.6 kg. NU bearings carry radial forces and allow axial displacement in both directions, making them suitable as floating….

Bearing - 6216 2RS1 C3 SKF

80 × 140 × 26 mm. Rolling bearing for use in machinery and equipment.

Bearing - 6000 2RSH SKF

10 × 26 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 6006 2RS ZVL

30 × 55 × 13 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.

Bearing - NU 224 E XL M1 FAG

120 × 215 × 40 mm. FAG bearing with the complete designation. When selecting a replacement, compare the full designation, dimensions and design required for the application.

Bearing - 6322 FAG

110 × 240 × 50 mm. Rolling bearing for use in machinery and equipment.

Bearing - 30206 A KLF

30 × 62 × 17.25 mm. single-row tapered roller bearing for high radial loads combined with axial load in one direction. The separable design allows the inner ring assembly and outer ring to be mounted independently.

Bearing - 6308 2RS ZVL

40 × 90 × 23 mm. Rubber seals on both sides.

Bearing - 6301 2Z ZKL

12 × 37 × 12 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Dynamic load rating 9.8 kN, mass 0.06 kg.