KINEX, Page 2

Bearing - 61803 2RS KINEX

17 × 26 × 5 mm. Compact single-row deep-groove ball bearing with contact rubber seals on both sides.

Bearing - 61902 2RS KINEX

15 × 28 × 7 mm. Compact single-row deep-groove ball bearing with contact rubber seals on both sides.

Bearing - 30304 A KINEX

20 × 52 × 16.25 mm. single-row tapered roller bearing for combined radial and one-direction axial loads; the separable design requires correct clearance or preload adjustment.

Bearing - 30206 A KINEX

30 × 62 × 17.25 mm. is a single-row tapered roller bearing for combined radial and axial loads. Its separable design simplifies mounting and precise adjustment of clearance or preload.

Bearing - 6212 2RSR KINEX

60 × 110 × 22 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RSR design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

Bearing - 6200 2RS KINEX

Dimensions: 10 × 30 × 9 mm KINEX bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 628 2Z KINEX

KINEX bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 32307 A KINEX

35 × 80 × 32.75 mm. tapered roller bearing is a robust single-row bearing for high radial loads combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently. For a correct replacement, compare the complete designation including suffix A, the dimensions and required clearance with the original part.

Bearing - 61905 2RS KINEX

25 × 42 × 9 mm. The thin-section deep-groove ball bearing is a compact single-row bearing with contact rubber seals on both sides. It combines a small radial cross-section and low weight with the ability to support radial loads and moderate axial forces in both directions. Suitable for small electric motors, instruments, gearboxes, robotics and other mechanisms with restricted radial space.

Bearing - 1202 KINEX

15 × 35 × 11 mm. bearing with the verified designation. Compare the complete designation, dimensional data and design with the original part. Confirm suitability for the specific bearing arrangement in KINEX documentation.  

Bearing - 32008 AX KINEX

40 × 68 × 19 mm. Single-row tapered roller bearing is a separable single-row bearing for high radial loads combined with axial load in one direction. Two bearings in an opposed arrangement are normally used when axial location is required in both directions.

Bearing - 1205 KINEX

25 × 52 × 15 mm. bearing with the verified designation. Compare the complete designation, dimensional data and design with the original part. Confirm suitability for the specific bearing arrangement in KINEX documentation.  

Bearing - 629 2RS KINEX

9 × 26 × 8 mm. deep-groove ball bearing is a single-row bearing with rubber seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage and common contaminants.

Bearing - 30214 A KINEX

70 × 125 × 26.25 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 62209 2RS KINEX

45 × 85 × 23 mm. deep-groove ball bearing is a single-row bearing with rubber seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage and common contaminants.