KINEX
We can arrange delivery of almost any KINEX product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
KINEX – product identification and supply
The KINEX designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
Product sorting
List of products
Bearing - 6001 2RS KINEX
12 × 28 × 8 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 6203 2RS KINEX
17 × 40 × 12 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 6303 2Z KINEX
17 × 47 × 14 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against KINEX documentation and the requirements of the specific application.
Bearing - 30205 A KINEX
25 × 52 × 16.25 mm. single-row tapered roller bearing for high radial loads combined with axial load in one direction. The separable design allows the inner ring assembly and outer ring to be mounted independently.
Bearing - 605 ZZ KINEX
Metal shields on both sides single-row deep groove ball bearing with non-contact metal shields on both sides. The shields help retain lubricant and limit the ingress of larger contaminants while adding very little friction.
Bearing - 51105 KINEX
25 × 42 × 11 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 61900 2RS KINEX
10 × 22 × 6 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A slim sealed bearing for radial and moderate axial loads in both directions, protected against contamination and lubricant loss.
Bearing - 6205 2RS KINEX
25 × 52 × 15 mm. deep-groove ball bearing with rubber seals on both sides.
Bearing - 30305 A KINEX
25 × 62 × 18.25 mm. single-row tapered roller bearing for combined radial and axial loads acting in one direction; its separable design allows the cone assembly and outer ring to be mounted separately.
Bearing - 6304 2RS KINEX
20 × 52 × 15 mm. KINEX bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 61804 2RS KINEX
20 × 32 × 7 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against KINEX documentation and the requirements of the specific application.
Bearing - 6302 2RS KINEX
15 × 42 × 13 mm. KINEX bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 30303 A KINEX
17 × 47 × 15.25 mm. KINEX single-row tapered roller bearing for combined radial and axial loads in one direction.
Bearing - 6309 2RS KINEX
45 × 100 × 25 mm. single-row deep-groove ball bearing with rubber seals on both sides. For radial loads and limited axial loads in either direction.
Bearing - 30309 A KINEX
45 × 100 × 27.25 mm. KINEX bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 6000 2RS KINEX
10 × 26 × 8 mm. single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.
Bearing - 61803 2RS KINEX
17 × 26 × 5 mm. Compact single-row deep-groove ball bearing with contact rubber seals on both sides.