ZKL, Page 12
We can arrange delivery of almost any ZKL product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
ZKL – product identification and supply
The ZKL designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
Product sorting
List of products
Bearing - NU 215 ZKL
75 × 130 × 25 mm. Single-row cylindrical roller bearing for high radial loads and accurate shaft guidance. The NU design permits axial displacement of the shaft relative to the housing in both directions; when replacing, compare the complete designation and required internal clearance.
Bearing - NJ 407 ZKL
35 × 100 × 25 mm. Single-row cylindrical roller bearing for high radial loads with axial shaft location in one direction. The NJ design permits axial displacement in the opposite direction; when replacing, compare the complete designation and required internal clearance.
Bearing - N 305 ZKL
25 × 62 × 17 mm. Single-row cylindrical roller bearing for high radial loads and accurate shaft guidance. The N design permits axial displacement of the shaft relative to the housing in both directions; when replacing, compare the complete designation and required internal clearance.
Bearing - N 207 ZKL
35 × 72 × 17 mm. Single-row cylindrical roller bearing for high radial loads and accurate shaft guidance. The N design permits axial displacement of the shaft relative to the housing in both directions; when replacing, compare the complete designation and required internal clearance.
Bearing - 6412 N ZKL
60 × 150 × 35 mm. Single-row deep-groove ball bearing for radial and axial loads in both directions. The N design has a snap-ring groove in the outer ring; when replacing, retain the complete designation and verify the axial locating method.
Bearing - 6207 N ZKL
35 × 72 × 17 mm. Single-row deep-groove ball bearing for radial and axial loads in both directions. The N design has a snap-ring groove in the outer ring; when replacing, retain the complete designation and verify the axial locating method.
Bearing - 3304 C3 ZKL
20 × 52 × 22 mm. Greater radial internal clearance. Double-row angular-contact ball bearing for rigid arrangements under combined loads. It carries radial load and axial loads in both directions; C3 clearance provides extra allowance where thermal expansion or tight fits reduce operating clearance.
Bearing - 32213 ZKL
65 × 120 × 32.75 mm. Single-row tapered roller bearing for high radial loads and axial load in one direction. The separable outer ring simplifies installation; the correct clearance or preload is set in conjunction with an opposing bearing.
Bearing - 7212 P6 ZKL
60 × 110 × 22 mm. Higher accuracy class P6 Single-row angular-contact ball bearing for combined radial load and axial load in one direction. P6 accuracy is suitable for arrangements with higher requirements for dimensional and running accuracy.
Bearing - 511Z35 ZKL
35 × 53.6 × 12.8 mm. Special single-direction thrust ball bearing for axial load in one direction. Separable design with a shaft washer, housing washer and ball-and-cage assembly; compare the full designation and dimensions before replacement.
Bearing - 32219 E ZKL
95 × 170 × 45.5 mm. Single-row tapered roller bearing for high radial loads and axial load in one direction. The separable design simplifies mounting; the E suffix is part of the exact designation and must match the equipment documentation when replacing the bearing.
Bearing - 30208 AP6 ZKL
40 × 80 × 19.75 mm. Single-row tapered roller bearing for high radial loads and axial load in one direction. The cone and cup are separable; the complete AP6 suffix is part of the exact specification and must match the machine documentation.
Bearing - 2207 ZKL
35 × 72 × 23 mm. Double-row self-aligning ball bearing with a cylindrical bore. The spherical outer-ring raceway accommodates angular misalignment; suitable primarily for radial load and limited axial load in both directions.
Bearing - 1212 K ZKL
60 × 110 × 22 mm. ZKL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 1207 K ZKL
35 × 72 × 17 mm. ZKL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 6208 N ZKL
40 × 80 × 18 mm. Single-row deep groove ball bearing in open design, with a snap-ring groove in the outer ring. Suitable for radial and axial loads in both directions; the N suffix denotes the groove, not an included snap ring.
Bearing - 32009 AX ZKL
45 × 75 × 20 mm. Single-row tapered roller bearing for high radial load combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently.
Bearing - 6210 Z ZKL
50 × 90 × 20 mm. Metal shield on one side.