ZKL, Page 13
We can arrange delivery of almost any ZKL product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
ZKL – product identification and supply
The ZKL designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
Product sorting
List of products
Bearing - 51106 N ZKL
30 × 47 × 11 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 6301 Z ZKL
12 × 37 × 12 mm. single-row deep groove ball bearing with a non-contact metal shield on one side. Suitable for radial and moderate axial loads in both directions when one side of the bearing needs protection from coarse contamination.
Bearing - 6207 RS ZKL
35 × 72 × 17 mm. single-row deep groove ball bearing with a contact rubber seal on one side. Suitable for radial and moderate axial loads in both directions when one side requires improved protection from dust, contamination and lubricant loss.
Bearing - 51105 P6 ZKL
25 × 42 × 11 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 32305 A ZKL
25 × 62 × 25.25 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - NU 2206 BNA P62 ZKL
30 × 62 × 20 mm. single-row cylindrical roller bearing is designed for high radial loads and allows axial displacement of the shaft relative to the housing in both directions. P62 denotes P6 dimensional and running accuracy combined with reduced C2 radial internal clearance.
Bearing - NJ 2207 ZKL
35 × 72 × 23 mm. single-row cylindrical roller bearing is designed for high radial loads and can also locate the shaft axially in one direction. Its separable construction allows the inner ring to be installed independently of the outer ring and roller assembly.
Bearing - 30213 A ZKL
65 × 120 × 24.75 mm. single-row tapered roller bearing carries high radial load together with axial load in one direction. Its separable inner assembly with rollers and separate outer ring simplify mounting.
Bearing - 1310 ZKL
50 × 110 × 27 mm. ZKL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 51203 P6 ZKL
17 × 35 × 12 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 51211 ZKL
55 × 90 × 22 mm. single-direction thrust ball bearing is designed to carry axial load in one direction. Its separable construction consists of a shaft washer, a housing washer and a ball-and-cage assembly.
Bearing - 51109 ZKL
45 × 65 × 14 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 1207 P6 ZKL
35 × 72 × 17 mm. ZKL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 22212 ZKL
60 × 110 × 28 mm. double-row spherical roller bearing with a cylindrical bore carries high radial loads and axial loads in both directions. Its self-aligning design helps accommodate slight misalignment and shaft deflection.
Bearing - 6301 2RS ZKL
12 × 37 × 12 mm. Rubber seals on both sides.
Bearing - 6307 Z ZKL
35 × 80 × 21 mm. deep groove ball bearing has a non-contact metal shield on one side. The shield limits the ingress of larger contaminants and lubricant loss while retaining low friction; the opposite side remains open.
Bearing - 6307 2RS C3 ZKL
35 × 80 × 21 mm. Rubber seals on both sides. Greater radial internal clearance.
Bearing - 22309 J ZKL
45 × 100 × 36 mm. Bearing for industrial rotating assemblies. Before selection, verify the complete designation, dimensions and requirements of the specific application.