ZKL, Page 7
We can arrange delivery of almost any ZKL product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
ZKL – product identification and supply
The ZKL designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
Product sorting
List of products
Bearing - 22312 KM ZKL
60 × 130 × 46 mm. double-row spherical roller bearing with a 1:12 tapered bore and machined brass cage. For high radial and axial loads in either direction; accommodates angular misalignment.
Bearing - 1203 ZKL
17 × 40 × 12 mm. bearing with the verified designation. Compare the complete designation, dimensional data and design with the original part. Confirm suitability for the specific bearing arrangement in ZKL documentation.  
Bearing - 22312 KW33J ZKL
60 × 130 × 46 mm. double-row spherical roller bearing with a 1:12 tapered bore, W33 lubrication groove and three holes, and a J steel cage. The self-aligning design carries high radial loads together with axial loads in both directions.
Bearing - NJ 305 NA P6 ZKL
25 × 62 × 17 mm. single-row cylindrical roller bearing with high radial capacity, axial guidance in one direction and increased P6 accuracy. The NA design uses matched, non-interchangeable rings.
Bearing - 6011 ZKL
55 × 90 × 18 mm. Single-row open deep-groove ball bearing for radial and axial loads in both directions. Dynamic load rating 30.857 kN, mass 0.38 kg. Inner diameter d = 55 mm, outer diameter D = 90 mm, width B = 18 mm.
Bearing - 2306 ZKL
30 × 72 × 27 mm. double-row self-aligning ball bearing for arrangements with minor shaft-to-housing misalignment. Dynamic load rating 32.3 kN, mass 0.50 kg.
Bearing - 6301 2Z ZKL
12 × 37 × 12 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Dynamic load rating 9.8 kN, mass 0.06 kg.
Bearing - 6207 ZKL
35 × 72 × 17 mm. Single-row open deep groove ball bearing for radial loads and axial loads in both directions. The open design allows the lubrication method to be selected for the specific bearing arrangement.
Bearing - 6003 RS ZKL
17 × 35 × 10 mm. Single-row ZKL 6003-RS deep groove ball bearing with a rubber seal on one side. The sealed side helps protect the lubricant, while the opposite side remains open for the lubrication method defined by the bearing arrangement.
Bearing - PLC 23 5 ZKL
30 × 49.25 × 13.6 mm. ZKL PLC 23-5 special clutch ball bearing with a pressed-steel housing and steel cage. Intended for the later clutch design used on. Škoda 105–130 vehicles; always confirm compatibility by designation and dimensions.
Bearing - NU 2207 ZKL
35 × 72 × 23 mm. single-row cylindrical roller bearing for high radial loads. The NU design has two integral flanges on the outer ring and permits axial displacement of the shaft relative to the housing in both directions, making it suitable for a non-locating bearing position.
Bearing - 6208 2Z ZKL
40 × 80 × 18 mm. Metal shields on both sides single-row deep-groove ball bearing with a steel cage and non-contact shielding. Low friction and shields on both sides help retain the lubricant inside the bearing.
Bearing - 30213 E ZKL
65 × 120 × 24.75 mm. single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.
Bearing - 30308 AJ2 ZKL
40 × 90 × 25.25 mm. single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.
Bearing - 51111 A ZKL
55 × 78 × 16 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.