Bearing - 6207 ZKL
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
Bearing - 6207 ZKL
ZKL 6207 bearing
This single-row open deep groove ball bearing is a versatile choice for radial loads and can also accommodate axial loads in both directions. Its open design allows grease or oil lubrication to be selected the lubrication and sealing concept of the specific arrangement.
Verified ZKL technical data
- designation: 6207
- dimensions d × D × B: 35 × 72 × 17 mm
- basic dynamic load rating Cr: 25.7 kN
- basic static load rating C0r: 15.3 kN
- fatigue load limit Cu: 0.66 kN
- reference speed with grease: 11,000 r/min
- reference speed with oil: 13,000 r/min
- mass: 0.28 kg
Mounting dimensions
- minimum shaft shoulder diameter da: 42 mm
- maximum housing shoulder diameter Da: 65 mm
- maximum fillet radius ra: 1 mm
- minimum chamfer dimension rs: 1.1 mm
Before ordering, compare the dimensions, load ratings, speeds and lubrication method with the requirements of the specific arrangement. An open bearing requires suitable lubrication and protection against contamination. During installation, apply force only to the ring being fitted with interference; mounting force must not pass through the rolling elements.
Additional parameters
| Category: | Single row ball bearingsBearings 35 × 72 × 17 mm |
|---|---|
| Weight: | 0.28 kg |
| Inner diameter d (mm): | 35 |
| Outer diameter D (mm): | 72 |
| Width (mm): | 17 |
Product rating
Be the first who will post an article to this item!
We can source almost any ZKL product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about ZKL productsZKL – Product range and selection
The ZKL range includes, for example: ball bearings.
Examples from our catalogue
- B7016 AATB P5 OL ZKL
- 22206 EJA ZKL
- UCP212-36 ZKL
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
| Manufacturing company : | ZKL, a.s. |
|---|---|
| Address : | Jedovnická 2346/8, 628 00 Brno, Czech Republic |
| E-mail : | head@zkl.cz |