Bearing - 6009 2RS ZKL
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
Bearing - 6009 2RS ZKL
6009 2RS ZKL sealed deep-groove ball bearing
6009 2RS ZKL is a single-row deep-groove ball bearing with contact seals on both sides. The 2RS design improves protection of the lubricant and rolling space in dusty or damp environments.
Key features
- dimensions: 45 × 75 × 16 mm,
- 2RS contact seals on both sides,
- suitable for radial load and moderate axial loads in both directions,
- good protection from dust, moisture and common contaminants,
- helps retain and protect the lubricant inside the bearing.
Typical applications
Typical uses include electric motors, pumps, gearboxes, fans, conveyors and other industrial equipment requiring compact dimensions and a sealed bearing design.
Mounting guidance
Apply mounting force only through the ring being fitted and avoid damaging the sealing lips. Check the cleanliness of seating surfaces, the required shaft and housing fits, and the operating conditions. Contact seals provide more protection than metal shields, but they are not a pressure seal or a solution for permanent immersion.
Replacement check: compare the complete designation 6009 2RS ZKL, the dimensions 45 × 75 × 16 mm and the two-sided sealed design with the bearing being replaced.
Additional parameters
| Category: | Single row ball bearingsBearings 45 × 75 × 16 mm |
|---|---|
| Weight: | 0.25 kg |
| Inner diameter d (mm): | 45 |
| Outer diameter D (mm): | 75 |
| Width (mm): | 16 |
Product rating
Be the first who will post an article to this item!
We can source almost any ZKL product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about ZKL productsZKL – Product range and selection
The ZKL range includes, for example: ball bearings.
Examples from our catalogue
- B7016 AATB P5 OL ZKL
- 22206 EJA ZKL
- UCP212-36 ZKL
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
| Manufacturing company : | ZKL, a.s. |
|---|---|
| Address : | Jedovnická 2346/8, 628 00 Brno, Czech Republic |
| E-mail : | head@zkl.cz |