Product sorting
List of products
30x62x16 mm
FAG 6206 bearing with clearly stated mounting dimensions. The product name gives no suffix for closure or clearance; compare the complete marking on the original bearing before replacement.
30x62x16 mm
Single-row 6206 2RS1 SKF deep-groove ball bearing
Rubber seals on both sides; compare the complete designation before ordering.
30x62x16 mm
6206 2Z SKF single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.
30x62x16 mm
Single-row 6206 2RSR ZVL deep-groove ball bearing
Rubber seals on both sides; compare the complete designation before ordering.
30x62x16 mm
6206 2RS ZVL single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and moderate axial loads in both directions while protecting the rolling elements from dust, contamination and lubricant loss.
50x80x16 mm
ZKL 6010 A bearing with verified mounting dimensions; compare the complete A suffix before replacement.
50x80x16 mm
6010 ZVL single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.
30x62x16 mm
Single-row NU 206 ZKL cylindrical roller bearing in NU design
High radial capacity and axial displacement in both directions; compare the complete designation.
30x62x16 mm
7206 ZKL angular-contact ball bearing for combined radial and axial loads.
45x75x16 mm
FAG single-row deep groove ball bearing with metal shields on both sides (2Z).
30x62x16 mm
ZKL 1206 double-row self-aligning ball bearing with a cylindrical bore and open design.
Accommodates shaft-to-housing misalignment; for radial and light axial loads in either direction.
55x78x16 mm
ZKL 51111 A thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
30x62x16 mm
SKF 6206 2RS C3 single-row deep-groove ball bearing with contact rubber seals on both sides and C3 radial internal clearance.
50x80x16 mm
ZKL 6010 single-row deep-groove ball bearing in an open design, with no sealing or clearance suffix shown in the designation.
55x78x16 mm
ZVL 51111 thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
45x75x16 mm
6009 2RS ZKL is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants.
Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.
30x62x16 mm
6206 2ZR ZVL single-row deep-groove ball bearing with metal shields on both sides for lubricant protection and low friction.
45x75x16 mm
6009 2RS C3 ZKL deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing. C3 radial internal clearance is greater than normal, providing extra allowance for thermal expansion or tighter fits; it must match the machine design.
Practical advice
How to choose the right bearing
The same dimensions do not necessarily mean the same function. When selecting a replacement, check the construction, cover and seal design, internal clearance, and the conditions in which the bearing will operate.
Determine the type and size
Copy the full type designation. If missing, measure the inner diameter d, outer diameter D and width B.
Check the design
Distinguish open bearing, metal shields, and rubber seals. Also check internal clearance, accuracy, cage, and lubricant.
Take operating conditions into account
Rotational speed, direction, and magnitude of mechanical load, temperature, humidity, dust, and the method of installation are decisive.
How to read the type designation 6204 2RS C3
Suffixes may vary between manufacturers. When replacing, compare technical parameters, not just similar type designation.
Open, 2Z, or 2RS?
When are matching dimensions not enough?
A dimensionally identical bearing may have different load capacity, maximum speed, precision, or internal clearance. Pay special attention to electric motors, high temperatures, vibrations, shocks, and dusty or humid environments.
- radial, axial, and combined loads
- normal or increased internal clearance C3/C4
- operating temperature and maximum speed
- design of shields and seals, lubricant, cage material, and precision
Frequently asked questions
Can I replace a bearing with another brand?
Usually yes, if the design type, dimensions, internal clearance, precision, cover and seal design, load capacity, and allowable speeds match. The basic number alone is not enough; the meaning of the suffixes may vary according to the manufacturer.
How do I determine the diameter of the inner bore from the model designation?
For many common metric bearings, the bore diameter code from 04 is multiplied by five: for example, 04 = 20 mm and 06 = 30 mm. Codes 00 to 03 and some special designs have different rules, so it is advisable to verify the dimension.
Is 2RS better, or 2Z?
Neither is universally better. 2RS usually protects better against dirt and moisture, while 2Z tends to have lower friction and allows higher speeds. The right choice depends on the application.
What to send if the type designation is unreadable?
A photo of both sides, dimensions d × D × B, machine type, and information about speed, load, temperature, humidity, or dustiness. The more operational data we know, the more safely a replacement can be recommended.
Not sure about the replacement?
Send the type designation, dimensions, or a photo of the original part. We will help verify the suitable version before ordering.