Bearing - 608 2Z C3 INA
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
608 2Z C3 INA is a miniature single-row radial deep groove ball bearing measuring 8 × 22 × 7 mm. Non-contact metal shields on both sides (2Z). C3 – radial internal clearance greater than Normal.
Construction and function
Balls rolling between the inner and outer rings primarily carry radial loads; the deep groove design also accommodates axial loads in both directions.
Dimensions and design
- Designation: 608 2Z C3 INA
- Type: Miniature single-row deep groove ball bearing
- Bore diameter d: 8 mm
- Outside diameter D: 22 mm
- Width B: 7 mm
- Closure: Non-contact metal shields on both sides (2Z)
- Radial internal clearance: C3 – radial internal clearance greater than Normal
- Precision: Standard precision
- Catalogue bearing mass: 0.012 kg
The cylindrical bore d 8 mm fits the shaft seat, outer diameter D 22 mm fits the housing bore, and B 7 mm is the axial width. The compact dimensions suit small rotating mechanisms where installation space is limited.
What 2Z means
The suffix 2Z identifies metal shields on both sides. The shields do not contact the inner ring, helping to keep friction low. They retain grease and reduce the entry of contaminants, but do not make the bearing watertight.
C3 internal clearance
C3 – radial internal clearance greater than Normal. C3 is the initial internal clearance before mounting. Interference fits on the shaft and in the housing, as well as temperature differences, change the clearance in operation.
Mounting and replacement selection
Before mounting, check the dimensions, condition and cleanliness of both the shaft and housing. Apply pressing force through the ring being fitted with interference, never through the balls, and protect the shields from damage.
Additional parameters
| Category: | Single row ball bearingsBearings 8 × 22 × 7 mm |
|---|---|
| Weight: | 0.012 kg |
| Inner diameter d (mm): | 8 |
| Outer diameter D (mm): | 22 |
| Width (mm): | 7 |
| Designation: | 608 2Z C3 INA |
| Type: | Miniature single-row deep groove ball bearing |
| Bore diameter d: | 8 mm |
| Outside diameter D: | 22 mm |
| Width B: | 7 mm |
| Closure: | Non-contact metal shields on both sides (2Z) |
| Radial internal clearance: | C3 – radial internal clearance greater than Normal |
| Precision: | Standard precision |
| Catalogue bearing mass: | 0.012 kg |
Product rating
Be the first who will post an article to this item!
We can source almost any INA product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about INA productsINA – Product range and selection
The INA range includes, for example: needle roller bearings, linear guides, bearing units.
Examples from our catalogue
- ZKLF 2575 2RS 2AP INA
- GS 81106 INA
- TTUE40-XL INA
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
Select INA bearings and linear components by their full designation. First identify whether you need a bearing, linear bushing or another part of the assembly.
Compare function and mounting
For a bearing, check the construction and dimensions. For a linear bushing, include the guide shaft diameter, housing dimensions and mounting arrangement. Preserve all suffixes and send a photograph of the assembly if unclear.
Can I replace a part using dimensions alone?
The same dimensions can belong to different designs. Compare mounting, seals, precision and application requirements before selecting a replacement. Include the original marking and the quantity required.
Request a INA quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | Schaeffler Technologies AG & Co. KG |
|---|---|
| Address : | Industriestraße 1–3, 91074 Herzogenaurach, Germany |
| E-mail : | info@schaeffler.com |