Bearing - 6201 2RSR FAG
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
Bearing - 6201 2RSR FAG
FAG 6201-2RSR bearing
This single-row 62-series deep groove ball bearing has seals on both sides and a sheet-steel cage. Its design accommodates radial loads and can also carry axial loads in both directions. The two-sided sealing helps protect the bearing interior and retain the lubricant.
Verified FAG technical data
- designation: 6201-2RSR
- dimensions d × D × B: 12 × 32 × 10 mm
- basic dynamic radial load rating Cr: 7.3 kN
- basic static radial load rating C0r: 3.1 kN
- fatigue load limit Cur: 203 N
- limiting speed: 14,600 r/min
- approximate mass: 0.035 kg
- operating temperature in the datasheet: −20 to +100 °C
Mounting dimensions and selection
- minimum shaft shoulder diameter da: 16.2 mm
- maximum housing shoulder diameter Da: 27.8 mm
- maximum fillet radius ra: 0.6 mm
Before ordering, compare the 6201-2RSR designation, dimensions, loads, speeds and temperature with the requirements of the specific arrangement. During installation, apply force only to the ring being fitted with interference; mounting force must not pass through the rolling elements or seals.
Additional parameters
| Category: | Single row ball bearingsBearings 12 × 32 × 10 mm |
|---|---|
| Weight: | 0.038 kg |
| Inner diameter d (mm): | 12 |
| Outer diameter D (mm): | 32 |
| Width (mm): | 10 |
Product rating
Be the first who will post an article to this item!
We can source almost any FAG product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about FAG productsFAG – Product range and selection
The FAG range includes, for example: ball bearings, cylindrical and spherical roller bearings, tapered roller bearings.
Examples from our catalogue
- HCB 7006 CTP4SDUL FAG
- B7007 E 2RSD T P4S UL FAG
- UKP218-J7 FAG
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
Choose FAG bearings by the complete designation, including suffixes. The required design and operating conditions matter alongside the bearing dimensions.
Compare the complete specification
Check bore, outside diameter, width, internal clearance and the specified shielding or sealing. For a replacement, include the machine application and a photograph of the original marking.
Is a dimensionally identical bearing enough?
Verify the complete specification before substituting a bearing. Different suffixes can identify different designs; a similar reference alone does not confirm suitability.
Request a FAG quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | Schaeffler Technologies AG & Co. KG |
|---|---|
| Address : | Industriestraße 1–3, 91074 Herzogenaurach, Germany |
| E-mail : | info@schaeffler.com |