Bearing - 6306 Z ZKL

Not rated Rating details
€4,31 / pcs €3,56 excl. VAT Measure price:
In stock (13 pcs)
Delivery to:
18. 11. 2026
Delivery options
Quantity discount
1 - 4 pcs
€4,31 / pcs
5 - 9 pcs = discount 3 %
€4,18 / pcs
10 - 24 pcs = discount 6 %
€4,05 / pcs
25 - 49 pcs = discount 9 %
€3,92 / pcs
50 and more pcs = discount 12 %
€3,79 / pcs
You save €0

Bearing - 6306 Z ZKL

30 × 72 × 19 mm. Single-row deep groove ball bearing with a non-contact metal shield on one side. It carries radial and limited axial loads in both directions; the opposite side remains open.

Detailed information

Product detailed description

Bearing - 6306 Z ZKL

6306 Z ZKL is a single-row deep groove ball bearing with a metal shield on one side. The Z design protects the rolling contact from one side with a non-contact shield; the shield seat is formed on the inner ring and the opposite side remains open.

Key features

  • Dimensions d × D × B: 30 × 72 × 19 mm
  • Type: single-row deep groove ball bearing
  • Shielding: non-contact Z metal shield on one side
  • Basic dynamic load rating Cᵣ: 29.7 kN
  • Basic static load rating C₀ᵣ: 15.678 kN
  • Weight: approximately 0.33 kg

Design and lubrication

The shield is retained in the groove of the outer ring and is not intended to be removed. Its non-contact design limits contaminant ingress from the shielded side while maintaining low friction. the ZKL catalogue, shielded bearings in the basic design are filled with grease for approximately −30 to +100 °C, briefly up to +120 °C; under normal operating conditions the grease usually lasts for the bearing service life and the bearing cannot be relubricated.

Loads and mounting

The deep raceways are intended primarily for radial load and also accommodate limited axial loads in both directions. During mounting, orient the shielded and open sides to suit the housing design, protect the open side from contamination and do not transmit mounting force through the rolling elements.

Check before ordering

Compare the complete designation 6306 Z ZKL, dimensions 30 × 72 × 19 mm and the one-sided Z design. Z, ZR, 2Z and 2ZR variants differ in the number of shields and in the shield interface at the inner ring.

Additional parameters

Category: Single row ball bearings, Bearings 30 × 72 × 19 mm
Weight: 0.36 kg
Inner diameter d (mm): 30
Outer diameter D (mm): 72
Width (mm): 19

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field

We can source almost any ZKL product, even if you cannot find it in our online shop.

Send us the product designation and quantity required. We will check the price, availability and delivery options.

Enquire about ZKL products

ZKL – Product range and selection

The ZKL range includes, for example: ball bearings.

Examples from our catalogue

  • B7016 AATB P5 OL ZKL
  • 22206 EJA ZKL
  • UCP212-36 ZKL

What to include in your enquiry

  • The full product designation, including all suffixes and specifications.
  • The quantity required and, if relevant, when you need the part.
  • Nameplate details, dimensions or a description of the application if the designation is unknown.

You can email a photo or drawing to info@Loziska-Policka.cz.

Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.

Manufacturing company : ZKL, a.s.
Address : Jedovnická 2346/8, 628 00 Brno, Czech Republic
E-mail : head@zkl.cz