Bearing - HK 3520 CX
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
Bearing - HK 3520 CX
HK 3520 CX is an open-ended drawn-cup needle roller bearing with a cage and no separate inner ring. Its nominal dimensions are 35 × 42 × 20 mm. The compact design is intended for applications with limited radial space and a requirement for high radial load capacity.
Key features
- HK design: open at both ends and supplied without an inner ring.
- Loads: carries radial loads; axial guidance must be provided by a separate design element.
- Raceway: the shaft must be suitably hardened, precision-ground and finished to the required surface quality.
- Lubrication: the open design requires suitable lubricant and protection against dirt and moisture.
Installation and use
The thin-walled cup obtains its final geometry after press-fitting, so housing-bore accuracy, roundness and rigidity are important. Install the bearing evenly with a suitable mandrel; striking the thin cup can deform it. Before ordering, compare the full designation HK 3520 CX, dimensions and mounting requirements with the original component or technical documentation.
Additional parameters
| Category: | Drawn cup needle roller bearingsBearings 35 × 42 × 20 mm |
|---|---|
| Weight: | 0.044 kg |
| Inner diameter d (mm): | 35 |
| Outer diameter D (mm): | 42 |
| Width (mm): | 20 |
Product rating
Be the first who will post an article to this item!
We can source almost any CX product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about CX productsCX – Product range and selection
We can help identify the required version of a CX product from the complete designation and available documentation.
Examples from our catalogue
- 1212 K CX
- SN 510 CX
- LM 11749 10 CX
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.