CX
We can arrange delivery of almost any CX product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
CX – product identification and supply
The CX designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.
Product sorting
List of products
Bearing - 6204 2RS CX
20 × 47 × 14 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - SS 6200 2RS CX
10 × 30 × 9 mm. Rubber seals on both sides.
UCP 206 CX by CX: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 30 mm; H = 84 mm; A = 165 mm; H2 = 17 mm; H1 = 42.9 mm; B = 38.1 mm; E = 121 mm
Bearing - 6205 2RS CX
25 × 52 × 15 mm. is a single-row deep-groove ball bearing with rubber seals on both sides. It protects the lubricant and raceways from common contaminants while carrying radial and limited axial loads.
UCFC 216 CX by CX: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 80 mm; J = 16 mm; A = 240 mm; B = 82.6 mm; D = 170 mm; P = 200 mm; E = 141.4 mm
Bearing - 6202 2RS SS CX
15 × 35 × 11 mm. is a stainless-steel single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and common contaminants. The stainless-steel design provides improved corrosion resistance compared with standard bearing steel. Suitability for a specific chemical environment, temperature or water exposure must be….
Bearing - 6204 2Z CX
20 × 47 × 14 mm. single-row deep-groove ball bearing with non-contact metal shields on both sides for lubricant protection and low friction.
Bearing - 686 2Z -618/6- CX
6 × 13 × 5 mm. 686 2Z (618/6) CX miniature deep-groove ball bearing with non-contact metal shields on both sides for low friction and lubricant protection.
Bearing - HK 3520 CX
35 × 42 × 20 mm. drawn-cup needle roller bearing is an open-ended, thin-walled bearing without an inner ring. It provides high radial load capacity in a very small radial space; a suitably hardened and precision-ground shaft forms the inner raceway.
UCP 210 CX by CX: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 50 mm; H = 113 mm; A = 206 mm; H2 = 21 mm; H1 = 57.2 mm; B = 51.6 mm; E = 159 mm
Needle roller bearing - HK 2012 CX
20 × 26 × 12 mm. needle roller bearing for replacement use. Dimensions d × D × B: 20 × 26 × 12 mm. Before ordering, compare the complete designation, dimensions and design with the original part.
Bearing - 3306 CX
30 × 72 × 27 mm. Double-row angular contact ball bearing for combined radial and axial loads in both directions. This stocked item is specified with a width of 27 mm; compare it carefully with the original bearing before replacement.
Bearing - 6307 2RS CX
35 × 80 × 21 mm. Rubber seals on both sides.
Bearing - 61900 2Z CX
10 × 22 × 6 mm. Metal shields on both sides.
Needle roller bearing - NA 4906 2RS CX
30 × 47 × 17 mm. needle roller bearing for replacement use. Dimensions d × D × B: 30 × 47 × 17 mm. Before ordering, compare the complete designation, dimensions and design with the original part.
Bearing - 6001 2RS CX
12 × 28 × 8 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.
Bearing - 16005 2RS CX
25 × 47 × 8 mm. CX bearing with rubber seals on both sides. Before ordering, compare the complete designation, dimensions and design with the original part.
Bearing - 6202-2Z C3 CX
15 × 35 × 11 mm. Metal shields on both sides. Greater radial internal clearance.