Bearing sleeve - AHX 2311 FAG

Not rated Rating details
€49,08 / pcs €40,56 excl. VAT Measure price:
In stock (8 pcs)
Delivery to:
19. 11. 2026
Delivery options
Quantity discount
1 - 4 pcs
€49,08 / pcs
5 - 9 pcs = discount 3 %
€47,61 / pcs
10 - 24 pcs = discount 6 %
€46,14 / pcs
25 - 49 pcs = discount 9 %
€44,66 / pcs
50 and more pcs = discount 12 %
€43,19 / pcs
You save €0

Withdrawal sleeve for mounting a tapered-bore bearing on a cylindrical shaft. For a 50 mm shaft, 55 mm nominal bearing bore and M60 × 2 thread.

Detailed information

Product detailed description

AHX 2311 FAG is a longitudinally slit withdrawal sleeve with a 1:12 taper. It fits between the cylindrical shaft seat and the tapered bearing bore. Driving the sleeve into the bore creates the required tight fit; the sleeve is not a plain bearing or a running surface for a rotating journal.

Dimensions and design

  • Shaft diameter d1: 50 mm
  • Nominal bearing bore d: 55 mm
  • Catalogue dimension B1: 54 mm
  • Thread G: M60 × 2
  • Taper: 1:12
  • Thread length lG: 10 mm
  • Bearing overhang a1: 3 mm

Distinguishing the diameters and length

Dimension d1 = 50 mm refers to the cylindrical shaft, whereas d = 55 mm is the nominal size of the tapered bearing bore. They are not two alternative sizes for the same hole. B1 = 54 mm is a sleeve drawing dimension and must not be confused with bearing width. M60 × 2 specifies the external sleeve thread, not the shaft size.

Thread length lG = 10 mm describes the threaded section of the sleeve. Overhang a1 = 3 mm is the axial bearing overhang shown in the assembly drawing; it is neither bearing width nor sleeve length. These dimensions help check adjacent parts and the space required for the mounting tool.

Selecting the accessories

The sleeve is supplied without accessories. Select the bearing, mounting or dismounting tools and retaining parts separately for the assembly. When selecting a nut, compare the actual M60 × 2 thread and its function: mounting, axial retention and dismounting do not necessarily use the same part.

Mounting and dismounting

The bearing must have a matching tapered bore and be supported against a fixed shaft shoulder during mounting. The sleeve is then driven into the bearing bore. The drive-up determines the fit and affects bearing internal clearance; it must not be replaced by arbitrary tightening or an estimate based on force. Follow the procedure specified for the bearing.

Checks before inserting the sleeve

Check the condition and cleanliness of the tapered and cylindrical seats, an undamaged thread and a clear longitudinal slit. Confirm in advance that the arrangement permits access to the dismounting nut and removal of the sleeve during future maintenance. Check bearing clearance by the method prescribed by the bearing manufacturer; a tight fit alone does not prove correct mounting.

Common questions

Is AHX 2311 the same as an H-series adapter sleeve?

No. AHX 2311 is a withdrawal sleeve with a different mounting and dismounting arrangement. The same shaft diameter does not establish interchangeability with an H-series sleeve.

Can it be used with a cylindrical-bore bearing?

That is not the intended combination. The bearing taper, sleeve taper, length and adjacent retaining components must match.

FAG AHX2311 — PDF

Additional parameters

Category: Withdrawal sleeves
Weight: 0.285 kg
EAN: 4012801166942
Component type: Withdrawal sleeve
Shaft diameter d1: 50 mm
Nominal bearing bore d: 55 mm
Catalogue dimension B1: 54 mm
Thread G: M60 × 2
Taper: 1:12
Thread length lG: 10 mm
Bearing overhang a1: 3 mm

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field

We can source almost any FAG product, even if you cannot find it in our online shop.

Send us the product designation and quantity required. We will check the price, availability and delivery options.

Enquire about FAG products

FAG – Product range and selection

The FAG range includes, for example: ball bearings, cylindrical and spherical roller bearings, tapered roller bearings.

Examples from our catalogue

  • HCB 7006 CTP4SDUL FAG
  • B7007 E 2RSD T P4S UL FAG
  • UKP218-J7 FAG

What to include in your enquiry

  • The full product designation, including all suffixes and specifications.
  • The quantity required and, if relevant, when you need the part.
  • Nameplate details, dimensions or a description of the application if the designation is unknown.

You can email a photo or drawing to info@Loziska-Policka.cz.

Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.

Choose FAG bearings by the complete designation, including suffixes. The required design and operating conditions matter alongside the bearing dimensions.

Compare the complete specification

Check bore, outside diameter, width, internal clearance and the specified shielding or sealing. For a replacement, include the machine application and a photograph of the original marking.

Is a dimensionally identical bearing enough?

Verify the complete specification before substituting a bearing. Different suffixes can identify different designs; a similar reference alone does not confirm suitability.

Request a FAG quotation · Select bearings by designation or size

Availability and any replacement will be confirmed for the specific item.

Manufacturing company : Schaeffler Technologies AG & Co. KG
Address : Industriestraße 1–3, 91074 Herzogenaurach, Germany
E-mail : info@schaeffler.com