QMSN30J140SN
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
UCP 210 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 50 mm; h = 57.2 mm; a = 206 mm; e = 159 mm; b = 60 mm; S1 = 20 mm; S2 = 23 mm
UCFC 216 CX is a complete flanged bearing unit for an 80 mm shaft. It combines bearing UC216 with cast-iron housing FC216 and locks to the shaft using set-screws. The round flange has four fixing holes and a locating spigot.
This KUVAL product carries the complete designation S 617. When replacing a part, compare its complete marking and brand with the assembly documentation.
Separate pedestal housing for a radial insert ball bearing. ASE 14 13 INA identifies the housing; the complete arrangement also depends on the selected bearing.
UCP 204 IB is a complete bearing and housing unit with a 20 mm bore, standard Y-bearing sealing identified as 2F, and standard lubrication.
FY 50 FM SKF by SKF: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 50 mm; L = 143 mm; J = 111 mm; N = 18 mm; Da = 125.4 mm; T = 60.7 mm; A1 = 43 mm
This KUVAL product carries the complete designation S 509. When replacing a part, compare its complete marking and brand with the assembly documentation.
Split plummer block housing SNH 512 610 SKF. Da = 110 mm; L = 255 mm; J = 210 mm.
QMPF30J140ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 140 mm; L = 201.7 mm; J = 24 mm; H = 76.2 mm; A = 169.9 mm; B = 330.2 mm; K = 75.9 mm
This NTN product carries the complete designation UCFL 204 J. When replacing a part, compare its complete marking and brand with the assembly documentation.
QMPG30J150ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 150 mm; L = 198.6 mm; J = 24 mm; H = 76.2 mm; A = 170.0 mm; B = 332.2 mm; K = 75.9 mm
SN 510 SLB is a split plummer block housing for an arrangement with a separately selected bearing.
QMPX30J600SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 6 in.; L = 196.9 mm; J = 24 mm; H = 85.6 mm; A = 179.4 mm; B = 339.9 mm; K = 75.9 mm
FYC 508 SKF by SKF: flanged bearing housing (round flange).
Dimensions according to drawing: L = 145 mm; J = 120 mm; N = 14 mm; Da = 100 mm; A1 = 36 mm; A3 = 10 mm
Product detailed description
QMSN30J140SN by Timken: spherical roller bearing housed unit with a solid-block housing.
Technical specifications
- Designation: QMSN30J140SN
- Manufacturer: Timken
- Shaft diameter: 140 mm
- K: 76 mm
- J: 30 mm
- L: 202 mm
- S: 192 mm
- C: 205 mm
- G: 171 mm
- A: 170 mm
- B: 330 mm
- D min.: 461 mm
- F: 550 mm
- M: 116 mm
- H: 76 mm
- R: 7 mm
- D max.: 479 mm
- Housing material: cast steel
- Housing mounting: two-bolt pillow block (SN)
- Shaft locking: eccentric locking collar
- Sealing: triple-lip seal (Viton)
- Axial arrangement: non-expansion arrangement
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 44 kg |
| Celková šířka jednotky v ose hřídele (mm): | 202 |
| Délka základny domku (mm): | 550 |
| Shaft diameter (mm): | 140 |
| Šířka ložiskové části jednotky (mm): | 192 |
| Šířka základny domku (mm): | 171 |
| Výška domku (mm): | 330.4 |
| Výška osy hřídele (mm): | 170 |
DV 211 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 211 A designation, mounting arrangement and bearing seat.
SNG 515 612 GLH is a split plummer block housing for an arrangement with a separately selected bearing.
UCP 206 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 30 mm; h = 42.9 mm; a = 160 mm; e = 121 mm; b = 44 mm; S1 = 17 mm; S2 = 20 mm
This KUVAL product carries the complete designation S 610 A. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCF 209 DPI is a square flanged bearing unit for a 45 mm shaft. Shaft locking: set screws.
P 204 J NTN is a standalone pillow-block housing for a matching insert bearing.
Separate oval two-bolt flange housing for assembling an arrangement with a bearing insert. H = 197 mm; J = 157 mm; L = 115 mm.
UCP 207 CRAFT by CRAFT: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 35 mm; B = 42.9 mm; h = 47.6 mm; a = 167 mm; e = 127 mm; b = 48 mm; s1 = 17 mm
UCF 205 ASAHI is a complete flanged bearing unit for a 25 mm shaft. It combines bearing UC205 with cast-iron housing F205 and locks to the shaft using set-screws. The square flange has four fixing holes.
UCP 212 NTN is a pillow block bearing unit for a 60 mm shaft. Two set screws lock the bearing to the shaft; the designation without D1 identifies the maintenance-free version.
FYTB 506 M SKF by SKF: flanged bearing housing (oval flange).
Dimensions according to drawing: L = 83 mm; J = 116.5 mm; H = 141.5 mm; N = 11.5 mm; Da = 76.2 mm; A1 = 32.5 mm
This KUVAL product carries the complete designation S 613. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL bearing housing carries the complete designation S 512. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 505. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCF 207 MSC by MSC: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 35 mm; L = 117 mm
Product rating
Be the first who will post an article to this item!
We can source almost any TIMKEN product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about TIMKEN productsTIMKEN – Product range and selection
The TIMKEN range includes, for example: ball bearings, cylindrical and spherical roller bearings, tapered roller bearings, bearing units.
Examples from our catalogue
- 32208 TIMKEN
- 22308 CJW33 TIMKEN
- 33014 M TIMKEN
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
Choose TIMKEN bearings by the complete designation and the components required. Distinguish a complete bearing from a separately supplied component before requesting a quotation.
Specify the complete bearing arrangement
For a tapered roller bearing, include the cone and cup references where specified. For other bearing designs, preserve the complete marking and suffixes. Add the required quantity and dimensions of the original part.
Is one ring reference enough for a complete set?
Check the supplied components against the original specification. A reference may identify only one component, so a complete set must not be assumed. Send photographs of both ring markings if the information is incomplete.
Request a TIMKEN quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | Timken Europe |
|---|---|
| Address : | 2 Rue Timken, 68002 Colmar Cedex, France |