Bearing unit - 722518 B SNR
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
Cast-iron plummer block housing for an insert bearing, 240 mm long with 190 mm mounting centres. Supplied without the insert bearing.
UCF 208 ASAHI is a four-bolt square flanged bearing unit for a 40 mm shaft. Two set screws secure the bearing to the shaft.
MFC40 RHP by RHP: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 40 mm; L = 133.4 mm; J = 111.1 mm; H = 92.1 mm; G = 10 mm
Split plummer block housing SN 510 CX. Shaft diameter: 45 mm; D = 90 mm.
UCF 207 MSC by MSC: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 35 mm; L = 117 mm
UCP 205 CRAFT by CRAFT: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 25 mm; B = 34.1 mm; h = 36.5 mm; a = 140 mm; e = 105 mm; b = 38 mm; s1 = 13 mm
F 208 NTN is a one-piece cast iron bearing housing with a square flange and four fixing holes. It is a housing for assembling a bearing arrangement; F 208 alone does not designate a complete UCF208 unit.
QMPG30J150ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 150 mm; L = 198.6 mm; J = 24 mm; H = 76.2 mm; A = 170.0 mm; B = 332.2 mm; K = 75.9 mm
This KUVAL product carries the complete designation S 610. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 505. When replacing a part, compare its complete marking and brand with the assembly documentation.
FYTB 30 TF SKF by SKF: flange bearing unit (oval flange).
Dimensions according to drawing: Shaft diameter: 30 mm; L = 83 mm; J = 116.5 mm; H = 141.5 mm; B = 38.1 mm; N = 11.5 mm; Da = 76.2 mm
SY 508 M SKF by SKF: pillow block bearing housing.
Dimensions according to drawing: L = 175 mm; J = 135.5 mm; H = 99 mm; A = 48 mm; H2 = 19 mm; H1 = 49.2 mm
This STEYR product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
Product detailed description
722518 B SNR by SNR: bearing housing.
Technical specifications
- Designation: 722518 B SNR
- Manufacturer: SNR
- a: 210 mm
- h: 105 mm
- m: 170 mm
- Series: 722500
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 12 kg |
QMPX30J600SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 6 in.; L = 196.9 mm; J = 24 mm; H = 85.6 mm; A = 179.4 mm; B = 339.9 mm; K = 75.9 mm
This ZKL product carries the complete designation UCSG 205. When replacing a part, compare its complete marking and brand with the assembly documentation.
PCJT 20 INA is an oval flanged bearing unit for a 20 mm shaft, mounted by two bolts. It uses an eccentric locking collar to secure the shaft and has P seals.
UCFC 210 ASAHI is a four-bolt round flanged bearing unit with a locating spigot for a 50 mm shaft. Two set screws secure it to the shaft.
UCFL 206 ASAHI is a complete flanged bearing unit for a 30 mm shaft. It combines bearing UC206 with cast-iron housing FL206 and locks to the shaft using set-screws.
This NTN product carries the complete designation UCCFC 212. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCFC 207 ASAHI is a complete flanged bearing unit for a 35 mm shaft. It combines bearing UC207 with cast-iron housing FC207 and locks to the shaft using set-screws. The round flange has four fixing holes and a locating spigot.
UCF 207 ASAHI is a complete flanged bearing unit for a 35 mm shaft. It combines bearing UC207 with cast-iron housing F207 and locks to the shaft using set-screws. The square flange has four fixing holes.
UCP 207 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 35 mm; h = 47.6 mm; a = 167 mm; e = 127 mm; b = 48 mm; S1 = 17 mm; S2 = 20 mm
Separate oval two-bolt flange housing for assembling an arrangement with a bearing insert.
Split plummer block housing SNH 512 610 SKF. Da = 110 mm; L = 255 mm; J = 210 mm.
UCP 316 D1 NTN is a pillow block bearing unit for an 80 mm shaft. Two set screws lock the bearing to the shaft, and suffix D1 identifies the relubricatable version.
QMCW30J140ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 140 mm; J = 24 mm; B.C. = 368.3 mm; H = 26.2 mm; D = 304.8 mm; N = 121.4 mm; E = 184.2 mm
UCF 208 BBC by BBC: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 40 mm; a = 130 mm; e = 102 mm; i = 21 mm; g = 16 mm; l = 36 mm; s = 14 mm
This EU-ROLL product carries the complete designation SN 512. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 612. When replacing a part, compare its complete marking and brand with the assembly documentation.
Product rating
Be the first who will post an article to this item!
We can source almost any SNR product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about SNR productsSNR – Product range and selection
The SNR range includes, for example: ball bearings, bearing units.
Examples from our catalogue
- 6308 SNR
- 51215 SNR
- USPG210 SNR
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
| Manufacturing company : | NTN Europe |
|---|---|
| Address : | 1 rue des Usines, B.P. 2017, 74010 Annecy, France |
| E-mail : | mailing.contact@ntn-snr.fr |