Bearing unit - GG LCTE05 AY25 XL NPP B
Related products
FYC 508 SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
TECH_NOTE_FYC508Round four-hole cast-iron flanged FYC 508 SKF housing/unit; Da 80 mm, J 120 mm, L 145 mm, mounting holes N 14 mm.
PFT 52 SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
TECH_NOTE_PFT52Oval flanged pressed-steel SKF PFT 52 housing for an insert bearing; H 95 mm, L 71 mm, J 76.2 mm, hole N 8.7 mm. Insert bearing not included.
UCFC 207 neu
Bearing unit for supporting a shaft in a mounting assembly. Check the designation, documentation or original part for dimensions and compatibility.
FYTB 30 TF SKF
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
TECH_NOTE_FYTB30Two-hole oval flanged cast-iron SKF FYTB 30 TF unit for a 30 mm shaft; H 141.5 mm, J 116.5 mm, L 83 mm, holes N 11.5 mm.
Product detailed description
INA GG LCTE05 AY25 XL NPP B is a complete two-hole oval flange bearing unit. It consists of a GG.LCTE05 cast-iron housing and an AY 25-XL-NPP-B insert ball bearing.
The insert has d 25 mm, D 52 mm, overall width B 27 mm and outer-ring width C 15 mm. It has a spherical outer ring, two grub screws in the inner ring and double-sided NPP seals.
This is a ready-to-install unit for a 25 mm shaft. The insert has a basic dynamic load rating Cr of 14 kN, a basic static load rating C0r of 7.8 kN and an approximate insert mass of 0.15 kg. Verify the LCTE05 housing dimensions and assembly compatibility before installation.
d 35 × H 47,6 × L 167 × J 127 × A 48 mm | N 17 × N1 21 mm
P 207 CRAFT is a cast-iron pillow-block unit with a long base for a 35 mm shaft, UC 207 insert, set-screw locking and M14 mounting bolts.
d 30 · H 148 · L 80 · J 117 · A 31 · A2 40.2 mm
Complete two-bolt flanged SNR UCFL206 bearing unit with cast-iron FL206 housing, UC206G2 insert and M6×1 lubrication.
UKP216 FBJ
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part.
UCF 206 CN – d = 30 mm; L = 108 mm; J = 83 mm; B = 38.1 mm.
d 30 × H 42,9 × L 165 × J 121 × A 48 mm | N 17 × N1 20 mm
UCP 206 D1 DPI is a cast-iron UCP200 pillow block unit for a 30 mm shaft with a UC206D1 insert bearing, grease fitting and two set screws.
UL208 NTN
Bearing unit for supporting a shaft in an assembly. Before ordering, verify the designation, dimensions and compatibility with the original part. Bearing dimensions: 40 × 80 × 23 mm (inner diameter × outer diameter × width).
Product rating
Be the first who will post an article to this item!