Bearing unit - P 204 DPI
Related products
Product detailed description
d 20 × H 33,3 × L 127 × J 95 × A 38 mm | N 13 × N1 19 mm
P 204 DPI
P 204 DPI is a cast-iron pillow-block housing with a long base. In the standard UCP 204 assembly it is combined with a self-aligning UC 204 insert bearing for a 20 mm shaft; the insert is locked with set screws and the unit is relubricatable. Verified dimensions are d = 20 mm, center height H = 33.3 mm, total length L = 127 mm, fixing-hole distance J = 95 mm, base width A = 38 mm, mounting holes N = 13 mm × N1 = 19 mm, base height H1 = 14 mm, total height H2 = 65 mm and insert width B = 31 mm. Mounting bolts are M10, the grease connection is M6 and the complete unit weighs approximately 0.69 kg. Compare the designation, shaft diameter and base dimensions before ordering.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any DPI product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
DPI – product identification and supply
The DPI designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.