MP12CAS
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
RASEY 20 JIS INA by INA: pillow block bearing unit. Shaft diameter: 20 mm; set-screw locking.
SNG 515 612 GLH is a split plummer block housing for an arrangement with a separately selected bearing.
Split plummer block housing SN 513 DPI. Shaft diameter: 60 mm; L = 275 mm.
Separate pedestal housing for a radial insert ball bearing. ASE 14 13 INA identifies the housing; the complete arrangement also depends on the selected bearing.
SNH 507-606 SKF is a split plummer-block housing made of GG 20 grey cast iron. Width A is 82 mm and overall height H is 93 mm. The housing is supplied without a bearing or seals.
UCFC 208 BBC by BBC: flange bearing unit (round flange).
Dimensions according to drawing: Shaft diameter: 40 mm; a = 145 mm; p = 120 mm
P 210 SNR by SNR: bearing housing.
Dimensions according to drawing: L = 206 mm; J = 159 mm; H = 57.2 mm; A = 60 mm; H2 = 114 mm; H1 = 22 mm
DV 210 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 210 A designation, mounting arrangement and bearing seat.
Split plummer block housing SNH 512 610 SKF. Da = 110 mm; L = 255 mm; J = 210 mm.
UCFC 216 FYH is a four-bolt round flanged bearing unit with a locating spigot for an 80 mm shaft. Two set screws secure it to the shaft.
This KUVAL product carries the complete designation S 509. When replacing a part, compare its complete marking and brand with the assembly documentation.
SY 508 M SKF by SKF: pillow block bearing housing.
Dimensions according to drawing: L = 175 mm; J = 135.5 mm; H = 99 mm; A = 48 mm; H2 = 19 mm; H1 = 49.2 mm
Cast-iron plummer block housing for an insert bearing, 240 mm long with 190 mm mounting centres. Supplied without the insert bearing.
This KUVAL product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
SN 510 SLB is a split plummer block housing for an arrangement with a separately selected bearing.
Product detailed description
MP12CAS by RHP: pillow block bearing housing.
Technical specifications
- Designation: MP12CAS
- Manufacturer: RHP
- Housing material: cast iron
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 18 kg |
QMPF30J140ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 140 mm; L = 201.7 mm; J = 24 mm; H = 76.2 mm; A = 169.9 mm; B = 330.2 mm; K = 75.9 mm
UCFC 207 ASAHI is a complete flanged bearing unit for a 35 mm shaft. It combines bearing UC207 with cast-iron housing FC207 and locks to the shaft using set-screws. The round flange has four fixing holes and a locating spigot.
This KUVAL product carries the complete designation S 617. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCF 208 MSC by MSC: flange bearing unit (square flange). Shaft diameter: 40 mm.
UCFC 213 ASAHI is a round flanged bearing unit with spigot joint for a 65 mm shaft. Shaft locking: set screws.
UCFL 206 ASAHI is a complete flanged bearing unit for a 30 mm shaft. It combines bearing UC206 with cast-iron housing FL206 and locks to the shaft using set-screws.
UCFC 216 CX is a complete flanged bearing unit for an 80 mm shaft. It combines bearing UC216 with cast-iron housing FC216 and locks to the shaft using set-screws. The round flange has four fixing holes and a locating spigot.
Separate oval two-bolt flange housing for assembling an arrangement with a bearing insert. H = 197 mm; J = 157 mm; L = 115 mm.
This KUVAL product carries the complete designation S 613. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCP 212 NTN is a pillow block bearing unit for a 60 mm shaft. Two set screws lock the bearing to the shaft; the designation without D1 identifies the maintenance-free version.
UCF 208 BBC by BBC: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 40 mm; a = 130 mm; e = 102 mm; i = 21 mm; g = 16 mm; l = 36 mm; s = 14 mm
This KUVAL product carries the complete designation S 510. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCP 210 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 50 mm; h = 57.2 mm; a = 206 mm; e = 159 mm; b = 60 mm; S1 = 20 mm; S2 = 23 mm
DV 312 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 312 A designation, mounting arrangement and bearing seat.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any RHP product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
RHP – product identification and supply
The RHP designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.