NP11CAS
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
UCP 205 CRAFT by CRAFT: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 25 mm; B = 34.1 mm; h = 36.5 mm; a = 140 mm; e = 105 mm; b = 38 mm; s1 = 13 mm
UCFC 208 BBC by BBC: flange bearing unit (round flange).
Dimensions according to drawing: Shaft diameter: 40 mm; a = 145 mm; p = 120 mm
Split plummer block housing SN 513 DPI. Shaft diameter: 60 mm; L = 275 mm.
DV 312 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 312 A designation, mounting arrangement and bearing seat.
DV 210 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 210 A designation, mounting arrangement and bearing seat.
This KUVAL product carries the complete designation S 612. When replacing a part, compare its complete marking and brand with the assembly documentation.
QMCW30J140ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 140 mm; J = 24 mm; B.C. = 368.3 mm; H = 26.2 mm; D = 304.8 mm; N = 121.4 mm; E = 184.2 mm
MFC40 RHP by RHP: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 40 mm; L = 133.4 mm; J = 111.1 mm; H = 92.1 mm; G = 10 mm
UCFC 207 ASAHI is a complete flanged bearing unit for a 35 mm shaft. It combines bearing UC207 with cast-iron housing FC207 and locks to the shaft using set-screws. The round flange has four fixing holes and a locating spigot.
UCP 212 NTN is a pillow block bearing unit for a 60 mm shaft. Two set screws lock the bearing to the shaft; the designation without D1 identifies the maintenance-free version.
RASEY 25 XL N INA by INA: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 25 mm; L = 130 mm; J = 103 mm; H = 36.5 mm; A = 36 mm; H1 = 14.5 mm; A1 = 21 mm
SY 508 M SKF by SKF: pillow block bearing housing.
Dimensions according to drawing: L = 175 mm; J = 135.5 mm; H = 99 mm; A = 48 mm; H2 = 19 mm; H1 = 49.2 mm
F 208 NTN is a one-piece cast iron bearing housing with a square flange and four fixing holes. It is a housing for assembling a bearing arrangement; F 208 alone does not designate a complete UCF208 unit.
This KUVAL product carries the complete designation S 510. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 507. When replacing a part, compare its complete marking and brand with the assembly documentation.
FYC 508 SKF by SKF: flanged bearing housing (round flange).
Dimensions according to drawing: L = 145 mm; J = 120 mm; N = 14 mm; Da = 100 mm; A1 = 36 mm; A3 = 10 mm
Product detailed description
NP11CAS by RHP: pillow block bearing housing.
Technical specifications
- Designation: NP11CAS
- Manufacturer: RHP
- L: 266.0 mm
- H: 79.40 mm
- H1: 30.2 mm
- H2: 156.0 mm
- J max: 220.0 mm
- J min: 200.0 mm
- G: 24 mm
- A: 72.0 mm
- Housing material: cast iron
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 5.7 kg |
UCFC 210 ASAHI is a four-bolt round flanged bearing unit with a locating spigot for a 50 mm shaft. Two set screws secure it to the shaft.
This ZKL product carries the complete designation UCSG 205. When replacing a part, compare its complete marking and brand with the assembly documentation.
This STEYR product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
SN 510 SLB is a split plummer block housing for an arrangement with a separately selected bearing.
SY 30 TF SKF by SKF: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 30 mm; L = 152 mm; J = 117.5 mm; H = 82.5 mm; A = 40 mm; H2 = 17 mm; H1 = 42.9 mm
Cast-iron plummer block housing for an insert bearing, 240 mm long with 190 mm mounting centres. Supplied without the insert bearing.
This KUVAL product carries the complete designation S 616. When replacing a part, compare its complete marking and brand with the assembly documentation.
This NTN product carries the complete designation UCFL 204 J. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 509. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 516. When replacing a part, compare its complete marking and brand with the assembly documentation.
This Benn product carries the complete designation RL 95. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCP 316 D1 NTN is a pillow block bearing unit for an 80 mm shaft. Two set screws lock the bearing to the shaft, and suffix D1 identifies the relubricatable version.
UCP 206 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 30 mm; h = 42.9 mm; a = 160 mm; e = 121 mm; b = 44 mm; S1 = 17 mm; S2 = 20 mm
UCP 206 BBC by BBC: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 30 mm; h = 42.9 mm; a = 160 mm; e = 121 mm
Separate oval two-bolt flange housing for assembling an arrangement with a bearing insert. H = 197 mm; J = 157 mm; L = 115 mm.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any RHP product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
RHP – product identification and supply
The RHP designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.