NP75DEC
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
UCFL 205 KBS by KBS: flange bearing unit (oval flange).
Dimensions according to drawing: Shaft diameter: 25 mm; L = 68 mm; J = 99 mm; H = 130 mm; A = 27 mm
This KUVAL product carries the complete designation S 617. When replacing a part, compare its complete marking and brand with the assembly documentation.
Split plummer block housing SN 513 DPI. Shaft diameter: 60 mm; L = 275 mm.
This Benn product carries the complete designation RL 95. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 612. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCP 212 NTN is a pillow block bearing unit for a 60 mm shaft. Two set screws lock the bearing to the shaft; the designation without D1 identifies the maintenance-free version.
Separate pedestal housing for a radial insert ball bearing. ASE 14 13 INA identifies the housing; the complete arrangement also depends on the selected bearing.
UCF 205 ASAHI is a complete flanged bearing unit for a 25 mm shaft. It combines bearing UC205 with cast-iron housing F205 and locks to the shaft using set-screws. The square flange has four fixing holes.
DV 308 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 308 A designation, mounting arrangement and bearing seat.
RASEY 20 JIS INA by INA: pillow block bearing unit. Shaft diameter: 20 mm; set-screw locking.
UCFL 206 ASAHI is a complete flanged bearing unit for a 30 mm shaft. It combines bearing UC206 with cast-iron housing FL206 and locks to the shaft using set-screws.
UCP 208 DPI is a complete pillow block bearing unit for a 40 mm shaft. It combines bearing UC208 with cast-iron housing P208; set-screws lock the inner ring to the shaft.
QMPH30J508SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 5 1⁄2 in.; L = 199.1 mm; J = 24 mm; H = 76.2 mm; A = 169.9 mm; B = 330.7 mm; K = 75.9 mm
FY 50 FM SKF by SKF: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 50 mm; L = 143 mm; J = 111 mm; N = 18 mm; Da = 125.4 mm; T = 60.7 mm; A1 = 43 mm
Product detailed description
NP75DEC by RHP: pillow block bearing unit.
Technical specifications
- Designation: NP75DEC
- Manufacturer: RHP
- Shaft diameter: 75 mm
- L: 275.0 mm
- H: 82.60 mm
- H1: 28.0 mm
- H2: 164.0 mm
- J max: 228.0 mm
- J min: 206.0 mm
- G: 24 mm
- A: 74.0 mm
- Series: NP
- Housing material: cast iron
- Shaft locking: eccentric locking collar
- Sealing: single-lip seal
- Lubrication: grease lubrication
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 9 kg |
| Délka základny domku (mm): | 275 |
| Shaft diameter (mm): | 75 |
| Šířka ložiskové části jednotky (mm): | 92.14 |
| Šířka základny domku (mm): | 74 |
| Výška domku (mm): | 164 |
| Výška osy hřídele (mm): | 82.6 |
QMCW30J600ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 6 in.; J = 24 mm; B.C. = 419.1 mm; H = 26.2 mm; D = 304.8 mm; N = 128.5 mm; E = 209.6 mm
UCFC 216 CX is a complete flanged bearing unit for an 80 mm shaft. It combines bearing UC216 with cast-iron housing FC216 and locks to the shaft using set-screws. The round flange has four fixing holes and a locating spigot.
This KUVAL product carries the complete designation S 510. When replacing a part, compare its complete marking and brand with the assembly documentation.
This NTN product carries the complete designation UCFL 204 J. When replacing a part, compare its complete marking and brand with the assembly documentation.
DV 211 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 211 A designation, mounting arrangement and bearing seat.
Split plummer block housing SNH 512 610 SKF. Da = 110 mm; L = 255 mm; J = 210 mm.
UCFC 207 neu: flange bearing unit (round flange).
Dimensions according to drawing: Shaft diameter: 35 mm; L = 135 mm; J = 110 mm; A = 34 mm; B = 42.9 mm; N = 14 mm; J1 = 77.8 mm
UCF 208 ASAHI is a four-bolt square flanged bearing unit for a 40 mm shaft. Two set screws secure the bearing to the shaft.
This EU-ROLL product carries the complete designation SN 512. When replacing a part, compare its complete marking and brand with the assembly documentation.
PCJT 20 INA is an oval flanged bearing unit for a 20 mm shaft, mounted by two bolts. It uses an eccentric locking collar to secure the shaft and has P seals.
DV 312 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 312 A designation, mounting arrangement and bearing seat.
This KUVAL product carries the complete designation S 613. When replacing a part, compare its complete marking and brand with the assembly documentation.
QMPG30J140ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 140 mm; L = 198.6 mm; J = 24 mm; H = 76.2 mm; A = 170.0 mm; B = 332.2 mm; K = 75.9 mm
QVCW28V130SEM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 130 mm; H = 26.2 mm; D = 266.7 mm; C = 190.0 mm; Sv = 147.8 mm
Cast-iron plummer block housing for an insert bearing, 240 mm long with 190 mm mounting centres. Supplied without the insert bearing.
Separate oval two-bolt flange housing for assembling an arrangement with a bearing insert.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any RHP product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
RHP – product identification and supply
The RHP designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.