QVVTU16V070SEM
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
Cast-iron plummer block housing for an insert bearing, 240 mm long with 190 mm mounting centres. Supplied without the insert bearing.
SNH 507-606 SKF is a split plummer-block housing made of GG 20 grey cast iron. Width A is 82 mm and overall height H is 93 mm. The housing is supplied without a bearing or seals.
UCFL 205 KBS by KBS: flange bearing unit (oval flange).
Dimensions according to drawing: Shaft diameter: 25 mm; L = 68 mm; J = 99 mm; H = 130 mm; A = 27 mm
FYTB 506 M SKF by SKF: flanged bearing housing (oval flange).
Dimensions according to drawing: L = 83 mm; J = 116.5 mm; H = 141.5 mm; N = 11.5 mm; Da = 76.2 mm; A1 = 32.5 mm
This KUVAL product carries the complete designation S 508. When replacing a part, compare its complete marking and brand with the assembly documentation.
This INA product carries the complete designation MNE 11. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCP 316 D1 NTN is a pillow block bearing unit for an 80 mm shaft. Two set screws lock the bearing to the shaft, and suffix D1 identifies the relubricatable version.
This EU-ROLL product carries the complete designation SN 512. When replacing a part, compare its complete marking and brand with the assembly documentation.
SY 40 TF SKF by SKF: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 40 mm; L = 175 mm; J = 135.5 mm; H = 99 mm; A = 48 mm; H2 = 19 mm; H1 = 49.2 mm
UCFC 207 ASAHI is a complete flanged bearing unit for a 35 mm shaft. It combines bearing UC207 with cast-iron housing FC207 and locks to the shaft using set-screws. The round flange has four fixing holes and a locating spigot.
QMCW30J140ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 140 mm; J = 24 mm; B.C. = 368.3 mm; H = 26.2 mm; D = 304.8 mm; N = 121.4 mm; E = 184.2 mm
This Benn product carries the complete designation RL 95. When replacing a part, compare its complete marking and brand with the assembly documentation.
QMPX30J600SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 6 in.; L = 196.9 mm; J = 24 mm; H = 85.6 mm; A = 179.4 mm; B = 339.9 mm; K = 75.9 mm
This KUVAL product carries the complete designation S 507. When replacing a part, compare its complete marking and brand with the assembly documentation.
Product detailed description
QVVTU16V070SEM by Timken: spherical roller bearing housed unit with a solid-block housing.
Technical specifications
- Designation: QVVTU16V070SEM
- Manufacturer: Timken
- Shaft diameter: 70 mm
- P: 120.7 mm
- E: 150.9 mm
- J: 108.0 mm
- L: 219.7 mm
- S: 46.0 mm
- C: 25.4 mm
- G: 39.6 mm
- A: 76.2 mm
- N: 90.2 mm
- Rvv: 16.3 mm
- F: 39.6 mm
- D: 171.5 mm
- Housing material: cast steel
- Housing mounting: take-up arrangement
- Shaft locking: V-Lock; double nut
- Sealing: triple-lip seal (NBR)
- Axial arrangement: expansion arrangement
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 15.9 kg |
| Délka domku (mm): | 219.7 |
| Shaft diameter (mm): | 70 |
| Šířka domku v ose hřídele (mm): | 90.2 |
| Výška domku (mm): | 171.5 |
UCF 208 BBC by BBC: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 40 mm; a = 130 mm; e = 102 mm; i = 21 mm; g = 16 mm; l = 36 mm; s = 14 mm
UCP 207 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 35 mm; h = 47.6 mm; a = 167 mm; e = 127 mm; b = 48 mm; S1 = 17 mm; S2 = 20 mm
P 210 SNR by SNR: bearing housing.
Dimensions according to drawing: L = 206 mm; J = 159 mm; H = 57.2 mm; A = 60 mm; H2 = 114 mm; H1 = 22 mm
This KUVAL product carries the complete designation S 610 A. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 617. When replacing a part, compare its complete marking and brand with the assembly documentation.
DV 312 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 312 A designation, mounting arrangement and bearing seat.
UCP 213 JIB is a complete pillow block bearing unit for a 65 mm shaft. It combines bearing UC213 with cast-iron housing P213; set-screws lock the inner ring to the shaft.
UCP 205 CRAFT by CRAFT: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 25 mm; B = 34.1 mm; h = 36.5 mm; a = 140 mm; e = 105 mm; b = 38 mm; s1 = 13 mm
DV 308 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 308 A designation, mounting arrangement and bearing seat.
UCP 207 CRAFT by CRAFT: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 35 mm; B = 42.9 mm; h = 47.6 mm; a = 167 mm; e = 127 mm; b = 48 mm; s1 = 17 mm
UCF 208 ASAHI is a four-bolt square flanged bearing unit for a 40 mm shaft. Two set screws secure the bearing to the shaft.
UCF 210 MTM by MTM: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 50 mm; a = 143 mm; e = 111 mm; i = 22 mm; g = 18 mm; l = 40 mm; S = 16 mm
Split plummer block housing SN 510 CX. Shaft diameter: 45 mm; D = 90 mm.
Product rating
Be the first who will post an article to this item!
We can source almost any TIMKEN product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about TIMKEN productsTIMKEN – Product range and selection
The TIMKEN range includes, for example: ball bearings, cylindrical and spherical roller bearings, tapered roller bearings, bearing units.
Examples from our catalogue
- 32208 TIMKEN
- 22308 CJW33 TIMKEN
- 33014 M TIMKEN
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
Choose TIMKEN bearings by the complete designation and the components required. Distinguish a complete bearing from a separately supplied component before requesting a quotation.
Specify the complete bearing arrangement
For a tapered roller bearing, include the cone and cup references where specified. For other bearing designs, preserve the complete marking and suffixes. Add the required quantity and dimensions of the original part.
Is one ring reference enough for a complete set?
Check the supplied components against the original specification. A reference may identify only one component, so a complete set must not be assumed. Send photographs of both ring markings if the information is incomplete.
Request a TIMKEN quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | Timken Europe |
|---|---|
| Address : | 2 Rue Timken, 68002 Colmar Cedex, France |