SF40DEC
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
RCJTY 20 N INA by INA: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 20 mm; L = 61 mm; H = 112 mm; N = 11.5 mm; A1 = 10 mm
UCF 208 MSC by MSC: flange bearing unit (square flange). Shaft diameter: 40 mm.
UCFC 216 FYH is a four-bolt round flanged bearing unit with a locating spigot for an 80 mm shaft. Two set screws secure it to the shaft.
SY 30 TF SKF by SKF: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 30 mm; L = 152 mm; J = 117.5 mm; H = 82.5 mm; A = 40 mm; H2 = 17 mm; H1 = 42.9 mm
UCFC 210 ASAHI is a four-bolt round flanged bearing unit with a locating spigot for a 50 mm shaft. Two set screws secure it to the shaft.
UCP 213 DPI is a pillow-block bearing unit for a 65 mm shaft. Insert bearing: UC213; Housing: P213.
SNG 515 612 GLH is a split plummer block housing for an arrangement with a separately selected bearing.
UCP 213 JIB is a complete pillow block bearing unit for a 65 mm shaft. It combines bearing UC213 with cast-iron housing P213; set-screws lock the inner ring to the shaft.
SY 40 TF SKF by SKF: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 40 mm; L = 175 mm; J = 135.5 mm; H = 99 mm; A = 48 mm; H2 = 19 mm; H1 = 49.2 mm
UCP 204 IB is a complete bearing and housing unit with a 20 mm bore, standard Y-bearing sealing identified as 2F, and standard lubrication.
This EU-ROLL product carries the complete designation SN 512. When replacing a part, compare its complete marking and brand with the assembly documentation.
This ZKL product carries the complete designation UCSG 205. When replacing a part, compare its complete marking and brand with the assembly documentation.
QMPG30J150ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 150 mm; L = 198.6 mm; J = 24 mm; H = 76.2 mm; A = 170.0 mm; B = 332.2 mm; K = 75.9 mm
UCF 207 ASAHI is a complete flanged bearing unit for a 35 mm shaft. It combines bearing UC207 with cast-iron housing F207 and locks to the shaft using set-screws. The square flange has four fixing holes.
F 208 NTN is a one-piece cast iron bearing housing with a square flange and four fixing holes. It is a housing for assembling a bearing arrangement; F 208 alone does not designate a complete UCF208 unit.
Product detailed description
SF40DEC by RHP: flange bearing unit.
Technical specifications
- Designation: SF40DEC
- Manufacturer: RHP
- Shaft diameter: 40 mm
- L: 130.2 mm
- H: 101.6 mm
- J: 101.50 mm
- G: 12 mm
- Series: SF
- Housing material: cast iron
- Shaft locking: eccentric locking collar
- Sealing: single-lip seal
- Lubrication: grease lubrication
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 2.2 kg |
| Celková šířka jednotky v ose hřídele (mm): | 58.9 |
| Shaft diameter (mm): | 40 |
| Šířka ložiskové části jednotky (mm): | 56.33 |
| Šířka příruby (mm): | 130.19999999999999 |
| Výška příruby (mm): | 130.19999999999999 |
UCP 210 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 50 mm; h = 57.2 mm; a = 206 mm; e = 159 mm; b = 60 mm; S1 = 20 mm; S2 = 23 mm
SNH 507-606 SKF is a split plummer-block housing made of GG 20 grey cast iron. Width A is 82 mm and overall height H is 93 mm. The housing is supplied without a bearing or seals.
This INA product carries the complete designation MNE 11. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 507. When replacing a part, compare its complete marking and brand with the assembly documentation.
QMPX30J600SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 6 in.; L = 196.9 mm; J = 24 mm; H = 85.6 mm; A = 179.4 mm; B = 339.9 mm; K = 75.9 mm
QMPH30J515SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 5 15⁄16 in.; L = 201.7 mm; J = 24 mm; H = 85.9 mm; A = 179.4 mm; B = 339.9 mm; K = 75.9 mm
This KUVAL bearing housing carries the complete designation S 512. When replacing a part, compare its complete marking and brand with the assembly documentation.
Split plummer block housing SNH 512 610 SKF. Da = 110 mm; L = 255 mm; J = 210 mm.
UCF 209 DPI is a square flanged bearing unit for a 45 mm shaft. Shaft locking: set screws.
FYTB 506 M SKF by SKF: flanged bearing housing (oval flange).
Dimensions according to drawing: L = 83 mm; J = 116.5 mm; H = 141.5 mm; N = 11.5 mm; Da = 76.2 mm; A1 = 32.5 mm
MFC40 RHP by RHP: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 40 mm; L = 133.4 mm; J = 111.1 mm; H = 92.1 mm; G = 10 mm
This KUVAL product carries the complete designation S 508. When replacing a part, compare its complete marking and brand with the assembly documentation.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any RHP product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
RHP – product identification and supply
The RHP designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.