ST1.3/8DEC
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
Split plummer block housing SNH 512 610 SKF. Da = 110 mm; L = 255 mm; J = 210 mm.
Split plummer block housing SN 513 DPI. Shaft diameter: 60 mm; L = 275 mm.
This KUVAL product carries the complete designation S 616. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 609. When replacing a part, compare its complete marking and brand with the assembly documentation.
This KUVAL product carries the complete designation S 516. When replacing a part, compare its complete marking and brand with the assembly documentation.
Separate oval two-bolt flange housing for assembling an arrangement with a bearing insert.
UCF 207 MSC by MSC: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 35 mm; L = 117 mm
FYTB 506 M SKF by SKF: flanged bearing housing (oval flange).
Dimensions according to drawing: L = 83 mm; J = 116.5 mm; H = 141.5 mm; N = 11.5 mm; Da = 76.2 mm; A1 = 32.5 mm
This KUVAL product carries the complete designation S 511. When replacing a part, compare its complete marking and brand with the assembly documentation.
This ZKL product carries the complete designation UCSG 205. When replacing a part, compare its complete marking and brand with the assembly documentation.
DV 308 A KOVO CHEB: Housing for a suspended bearing arrangement in a machine structure. Replacement depends on the complete DV 308 A designation, mounting arrangement and bearing seat.
UCFC 207 ASAHI is a complete flanged bearing unit for a 35 mm shaft. It combines bearing UC207 with cast-iron housing FC207 and locks to the shaft using set-screws. The round flange has four fixing holes and a locating spigot.
Product detailed description
ST1.3/8DEC by RHP: take-up bearing unit.
Technical specifications
- Designation: ST1.3/8DEC
- Manufacturer: RHP
- Shaft diameter: 1 3/8 in
- L: 124.0 mm
- L1: 75.5 mm
- L2: 12.5 mm
- L3: 16.5 mm
- L4: 64.5 mm
- L5: 43.0 mm
- H: 101.5 mm
- H1: 64.5 mm
- H2: 37.5 mm
- H3: 89.0 mm
- N: 22.5 mm
- A: 36.5 mm
- Series: ST
- Housing material: cast iron
- Shaft locking: eccentric locking collar
- Sealing: single-lip seal
- Lubrication: grease lubrication
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 1.6 kg |
| Délka domku (mm): | 124 |
| Shaft diameter (mm): | 34.925 |
| Šířka domku v ose hřídele (mm): | 36.5 |
| Šířka ložiskové části jednotky (mm): | 51.13 |
| Výška domku (mm): | 101.5 |
UCF 209 DPI is a square flanged bearing unit for a 45 mm shaft. Shaft locking: set screws.
UCP 208 DPI is a complete pillow block bearing unit for a 40 mm shaft. It combines bearing UC208 with cast-iron housing P208; set-screws lock the inner ring to the shaft.
FY 50 FM SKF by SKF: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 50 mm; L = 143 mm; J = 111 mm; N = 18 mm; Da = 125.4 mm; T = 60.7 mm; A1 = 43 mm
UCP 212 NTN is a pillow block bearing unit for a 60 mm shaft. Two set screws lock the bearing to the shaft; the designation without D1 identifies the maintenance-free version.
This INA product carries the complete designation MNE 11. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCFC 208 BBC by BBC: flange bearing unit (round flange).
Dimensions according to drawing: Shaft diameter: 40 mm; a = 145 mm; p = 120 mm
This KUVAL product carries the complete designation S 507. When replacing a part, compare its complete marking and brand with the assembly documentation.
This Benn product carries the complete designation RL 95. When replacing a part, compare its complete marking and brand with the assembly documentation.
SY 30 TF SKF by SKF: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 30 mm; L = 152 mm; J = 117.5 mm; H = 82.5 mm; A = 40 mm; H2 = 17 mm; H1 = 42.9 mm
RCJTY 20 N INA by INA: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 20 mm; L = 61 mm; H = 112 mm; N = 11.5 mm; A1 = 10 mm
Complete pillow block unit for a 60 mm shaft, with set-screw locking and open-end cast dust covers. The C prefix forms part of this specific version.
P 204 J NTN is a standalone pillow-block housing for a matching insert bearing.
UCP 205 CRAFT by CRAFT: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 25 mm; B = 34.1 mm; h = 36.5 mm; a = 140 mm; e = 105 mm; b = 38 mm; s1 = 13 mm
UCFC 216 FYH is a four-bolt round flanged bearing unit with a locating spigot for an 80 mm shaft. Two set screws secure it to the shaft.
UCP 207 CRAFT by CRAFT: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 35 mm; B = 42.9 mm; h = 47.6 mm; a = 167 mm; e = 127 mm; b = 48 mm; s1 = 17 mm
MFC40 RHP by RHP: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 40 mm; L = 133.4 mm; J = 111.1 mm; H = 92.1 mm; G = 10 mm
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any RHP product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
RHP – product identification and supply
The RHP designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.