ST40DEC
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryRelated products
RASEY 25 XL N INA by INA: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 25 mm; L = 130 mm; J = 103 mm; H = 36.5 mm; A = 36 mm; H1 = 14.5 mm; A1 = 21 mm
This KUVAL product carries the complete designation S 609. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCP 316 D1 NTN is a pillow block bearing unit for an 80 mm shaft. Two set screws lock the bearing to the shaft, and suffix D1 identifies the relubricatable version.
UCF 208 BBC by BBC: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 40 mm; a = 130 mm; e = 102 mm; i = 21 mm; g = 16 mm; l = 36 mm; s = 14 mm
SY 30 TF SKF by SKF: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 30 mm; L = 152 mm; J = 117.5 mm; H = 82.5 mm; A = 40 mm; H2 = 17 mm; H1 = 42.9 mm
QMPH30J140ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 140 mm; L = 199.1 mm; J = 24 mm; H = 76.2 mm; A = 169.9 mm; B = 330.7 mm; K = 75.9 mm
FY 50 FM SKF by SKF: flange bearing unit (square flange).
Dimensions according to drawing: Shaft diameter: 50 mm; L = 143 mm; J = 111 mm; N = 18 mm; Da = 125.4 mm; T = 60.7 mm; A1 = 43 mm
UCP 201 MTM by MTM: pillow block bearing unit.
Dimensions according to drawing: Shaft diameter: 12 mm; h = 30.2 mm; a = 127 mm; e = 95 mm; b = 38 mm; S1 = 13 mm; S2 = 19 mm
QVVCW28V125SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 125 mm; H = 26.2 mm; D = 266.7 mm; Svv = 178.3 mm; C = 190.0 mm; Rvv = 33.8 mm
Split plummer block housing SN 513 DPI. Shaft diameter: 60 mm; L = 275 mm.
UCP 212 NTN is a pillow block bearing unit for a 60 mm shaft. Two set screws lock the bearing to the shaft; the designation without D1 identifies the maintenance-free version.
UCF 208 ASAHI is a four-bolt square flanged bearing unit for a 40 mm shaft. Two set screws secure the bearing to the shaft.
QAAMC26A130SM by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 130 mm; A = 19.8 mm; B = 38.1 mm; D = 7.9 mm; C = 175.0 mm; G = 141.7 mm; M = 94.5 mm
This KUVAL product carries the complete designation S 505. When replacing a part, compare its complete marking and brand with the assembly documentation.
QMCW30J150ST by Timken: spherical roller bearing housed unit with a solid-block housing.
Dimensions according to drawing: Shaft diameter: 150 mm; J = 24 mm; B.C. = 419.1 mm; H = 26.2 mm; D = 304.8 mm; N = 128.5 mm; E = 209.6 mm
MFC40 RHP by RHP: flange bearing unit.
Dimensions according to drawing: Shaft diameter: 40 mm; L = 133.4 mm; J = 111.1 mm; H = 92.1 mm; G = 10 mm
Product detailed description
ST40DEC by RHP: take-up bearing unit.
Technical specifications
- Designation: ST40DEC
- Manufacturer: RHP
- Shaft diameter: 40 mm
- L: 143.5 mm
- L1: 89.2 mm
- L2: 15.5 mm
- L3: 20.5 mm
- L4: 81.5 mm
- L5: 50.5 mm
- H: 118.0 mm
- H1: 82.5 mm
- H2: 49.5 mm
- H3: 101.0 mm
- N: 29.0 mm
- A: 49.5 mm
- Series: ST
- Housing material: cast iron
- Shaft locking: eccentric locking collar
- Sealing: single-lip seal
- Lubrication: grease lubrication
Before installation, check the dimensions, bearing arrangement and operating conditions against the manufacturer’s documentation. Follow the manufacturer’s installation and maintenance instructions.
Additional parameters
| Category: | Bearing housings |
|---|---|
| Weight: | 2.7 kg |
| Délka domku (mm): | 143.5 |
| Shaft diameter (mm): | 40 |
| Šířka domku v ose hřídele (mm): | 49.5 |
| Šířka ložiskové části jednotky (mm): | 56.33 |
| Výška domku (mm): | 118 |
UCFL 205 KBS by KBS: flange bearing unit (oval flange).
Dimensions according to drawing: Shaft diameter: 25 mm; L = 68 mm; J = 99 mm; H = 130 mm; A = 27 mm
This EU-ROLL product carries the complete designation SN 512. When replacing a part, compare its complete marking and brand with the assembly documentation.
UCFL 206 ASAHI is a complete flanged bearing unit for a 30 mm shaft. It combines bearing UC206 with cast-iron housing FL206 and locks to the shaft using set-screws.
Complete pillow block unit for a 60 mm shaft, with set-screw locking and open-end cast dust covers. The C prefix forms part of this specific version.
UCP 213 DPI is a pillow-block bearing unit for a 65 mm shaft. Insert bearing: UC213; Housing: P213.
UCFC 216 FYH is a four-bolt round flanged bearing unit with a locating spigot for an 80 mm shaft. Two set screws secure it to the shaft.
This ZKL product carries the complete designation UCSG 205. When replacing a part, compare its complete marking and brand with the assembly documentation.
SY 509 M SKF by SKF: pillow block bearing housing.
Dimensions according to drawing: L = 187 mm; J = 143.5 mm; H = 107.5 mm; A = 48 mm; H2 = 21 mm; H1 = 54 mm
SNG 515 612 GLH is a split plummer block housing for an arrangement with a separately selected bearing.
FYTB 506 M SKF by SKF: flanged bearing housing (oval flange).
Dimensions according to drawing: L = 83 mm; J = 116.5 mm; H = 141.5 mm; N = 11.5 mm; Da = 76.2 mm; A1 = 32.5 mm
P 204 J NTN is a standalone pillow-block housing for a matching insert bearing.
Separate oval two-bolt flange housing for assembling an arrangement with a bearing insert.
This KUVAL product carries the complete designation S 508. When replacing a part, compare its complete marking and brand with the assembly documentation.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any RHP product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
RHP – product identification and supply
The RHP designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.