Bearings, Page 5
Product sorting
Brands
Inner diameter d (mm)
Outer diameter D (mm)
Width B (mm)
List of products
Bearing - 6001 2Z SKF
12 × 28 × 8 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with the ability to carry radial and moderate axial loads in both directions.
Bearing - 605 ZZ KINEX
Metal shields on both sides single-row deep groove ball bearing with non-contact metal shields on both sides. The shields help retain lubricant and limit the ingress of larger contaminants while adding very little friction.
Bearing - 6201 ZD NSK
12 × 32 × 10 mm. single-row deep groove ball bearing for radial and moderate axial loads in both directions. The manufacturer-specific ZD suffix is part of the specification and the complete designation must be matched when replacing the bearing.
Bearing - 6201 2Z C3 SKF
12 × 32 × 10 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants. C3 provides greater radial internal clearance than the normal class.
Bearing - 6002 2Z C3 ZKL
15 × 32 × 9 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ZKL documentation and the requirements of the specific application.
Bearing - 6203 2RSH SKF
17 × 40 × 12 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A sealed bearing for radial and moderate axial loads in both directions, protected against contamination and lubricant loss.
Bearing - 51105 KINEX
25 × 42 × 11 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 6202 ZKL
15 × 35 × 11 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.
Bearing - 6302 2RS SKF
15 × 42 × 13 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 6204 2RS CX
20 × 47 × 14 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 309726 DA (VKBC 20012) SKF
34 × 64 × 37 mm. SKF 309726 DA compact double-row angular contact ball bearing, also listed under reference designation VKBC 20012. Intended for hub arrangements carrying combined radial and axial loads in both directions.
Bearing - 6004 ZKL
20 × 42 × 12 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.
Bearing - 623 ZKL
3 × 10 × 4 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.
Bearing - 6000 2RSH SKF
10 × 26 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - DAC 34640037 2RS KBS
34 × 64 × 37 mm. double-row ball bearing with contact rubber seals on both sides. A compact bearing for combined radial and axial loads in both directions, typically used in wheel-hub and similar precision arrangements.
Bearing - 6203 2RS SKF
17 × 40 × 12 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 6206 2RS ZVL
30 × 62 × 16 mm. single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and moderate axial loads in both directions while protecting the rolling elements from dust, contamination and lubricant loss.
Bearing - 6308 ZKL
40 × 90 × 23 mm. Rolling bearing for use in machinery and equipment.