Bearing - 6002 2Z TIMKEN
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
6002 2Z TIMKEN is a single-row deep groove ball bearing with metal shields on both sides. Dimensions d × D × B are 15 × 32 × 9 mm.
Dimensions and design
- Designation: 6002 2Z TIMKEN
- Type: Single-row deep groove ball bearing
- Bore diameter d: 15 mm
- Outside diameter D: 32 mm
- Width B: 9 mm
- Closure: Metal shields on both sides (2Z)
- Basic dynamic load rating C₁: 5.6 kN
- Basic static load rating C₀: 2.8 kN
- Limiting speed – grease: 22000 min⁻¹
- Limiting speed – oil: 30000 min⁻¹
- Maximum shaft fillet radius: 0.3 mm
- Internal clearance: Normal C0 radial clearance
- Bearing material: 52100
- Lubricant: Standard industrial grease
- Catalogue bearing mass: 0.03 kg
- Manufacturer designation: 6002-ZZ TIMKEN
Construction and function
Balls rolling between the inner and outer rings primarily carry radial loads; the deep groove design also accommodates axial loads in both directions.
The suffix 2Z identifies metal shields on both sides. They retain grease and reduce the entry of contaminants, but do not make the bearing watertight.
The bearing material is listed as 52100. A two-piece riveted steel cage maintains ball spacing. Standard industrial grease is specified for this variant; no particular filling quantity is stated here.
Lubrication and operation
Limiting speed is 22000 min⁻¹ with grease. The separate catalogue oil figure of 30000 min⁻¹ is not an instruction to replace the grease with oil. Operating speed also depends on load, temperature and heat dissipation. Normal radial clearance C0 is distinct from static load rating C₀; the similar notation does not denote the same quantity.
Mounting and replacement selection
The 15 mm bore d locates on the shaft, the 32 mm outside diameter D fits the housing seat and B of 9 mm is the overall width. Apply mounting force directly through the ring being fitted, not through the balls. When replacing the bearing, compare the full designation 6002 2Z TIMKEN, adjoining shoulders and machine operating requirements.
The shaft shoulder fillet radius must not exceed 0.3 mm. This is the maximum fillet of the mating shaft, not a width designation or minimum bearing chamfer.
Additional parameters
| Category: | Single row ball bearingsBearings 15 × 32 × 9 mm |
|---|---|
| Weight: | 0.032 kg |
| Inner diameter d (mm): | 15 |
| Outer diameter D (mm): | 32 |
| Width (mm): | 9 |
| Designation: | 6002 2Z TIMKEN |
| Type: | Single-row deep groove ball bearing |
| Bore diameter d: | 15 mm |
| Outside diameter D: | 32 mm |
| Width B: | 9 mm |
| Closure: | Metal shields on both sides (2Z) |
| Basic dynamic load rating C₁: | 5.6 kN |
| Basic static load rating C₀: | 2.8 kN |
| Limiting speed – grease: | 22000 min⁻¹ |
| Limiting speed – oil: | 30000 min⁻¹ |
| Maximum shaft fillet radius: | 0.3 mm |
| Internal clearance: | Normal C0 radial clearance |
| Bearing material: | 52100 |
| Lubricant: | Standard industrial grease |
| Catalogue bearing mass: | 0.03 kg |
| Manufacturer designation: | 6002-ZZ TIMKEN |
Product rating
Be the first who will post an article to this item!
We can source almost any TIMKEN product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about TIMKEN productsTIMKEN – Product range and selection
The TIMKEN range includes, for example: ball bearings, cylindrical and spherical roller bearings, tapered roller bearings, bearing units.
Examples from our catalogue
- 32208 TIMKEN
- 22308 CJW33 TIMKEN
- 33014 M TIMKEN
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.
Choose TIMKEN bearings by the complete designation and the components required. Distinguish a complete bearing from a separately supplied component before requesting a quotation.
Specify the complete bearing arrangement
For a tapered roller bearing, include the cone and cup references where specified. For other bearing designs, preserve the complete marking and suffixes. Add the required quantity and dimensions of the original part.
Is one ring reference enough for a complete set?
Check the supplied components against the original specification. A reference may identify only one component, so a complete set must not be assumed. Send photographs of both ring markings if the information is incomplete.
Request a TIMKEN quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | Timken Europe |
|---|---|
| Address : | 2 Rue Timken, 68002 Colmar Cedex, France |