Bearings
Product sorting
List of products
Bearing - 6202 2RS FAG
15 × 35 × 11 mm. Single-row deep-groove ball bearing with contact rubber seals on both sides (2RS). Check the complete designation and application suitability.
Bearing - 6202 C 2Z FAG
15 × 35 × 11 mm. Single-row deep-groove ball bearing. Metal shields on both sides; compare the complete designation, including suffixes.
Bearing - 6202 2RS C3 SKF
15 × 35 × 11 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; C3 means greater radial internal clearance, so verify suitability.
Bearing - 6002 2RS FAG
15 × 32 × 9 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 6202 2RS FBJ JAPAN
15 × 35 × 11 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 7202 AA ZKL
15 × 35 × 11 mm. single-row angular contact ball bearing for combined radial and axial loads. A single bearing carries axial load in one direction; a suitable paired arrangement is used when axial guidance is required in both directions.
Bearing - 6002 2Z C3 ZKL
15 × 32 × 9 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ZKL documentation and the requirements of the specific application.
Bearing - 6202 ZKL
15 × 35 × 11 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.
Bearing - 6302 2RS SKF
15 × 42 × 13 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 6202 2ZR ZKL
15 × 35 × 11 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.
Bearing - 6002 RS FLT
15 × 32 × 9 mm. single-row deep groove ball bearing with a contact rubber seal on one side. Suitable for radial and moderate axial loads in both directions when one side needs protection from dust, contamination and lubricant loss.
Bearing - 6002 2Z YUG
15 × 32 × 9 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with reliable radial and moderate axial load support in both directions.
Bearing - 6202 2RS INA
15 × 35 × 11 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 6002 2RS C3 SKF
15 × 32 × 9 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; C3 means greater radial internal clearance, so verify suitability.
Bearing - 6202 2RS P66 ZKL
15 × 35 × 11 mm. single-row deep-groove ball bearing with rubber seals on both sides. A versatile design for radial and limited axial loads in both directions, protected against common contaminants. Also compare the additional P66 designation when selecting a replacement.
Bearing - 6202 2Z INA
15 × 35 × 11 mm. deep-groove ball bearing with metal shields on both sides.
Bearing - 6202 2Z FAG
15 × 35 × 11 mm. ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against FAG documentation and the requirements of the specific application. Metal shields on both sides.
Bearing - 6002 Z ZKL
15 × 32 × 9 mm. deep-groove ball bearing with a metal shield on one side.
Practical advice
How to choose the right bearing
The same dimensions do not necessarily mean the same function. When selecting a replacement, check the construction, cover and seal design, internal clearance, and the conditions in which the bearing will operate.
Determine the type and size
Copy the full type designation. If missing, measure the inner diameter d, outer diameter D and width B.
Check the design
Distinguish open bearing, metal shields, and rubber seals. Also check internal clearance, accuracy, cage, and lubricant.
Take operating conditions into account
Rotational speed, direction, and magnitude of mechanical load, temperature, humidity, dust, and the method of installation are decisive.
How to read the type designation 6204 2RS C3
Suffixes may vary between manufacturers. When replacing, compare technical parameters, not just similar type designation.
Open, 2Z, or 2RS?
When are matching dimensions not enough?
A dimensionally identical bearing may have different load capacity, maximum speed, precision, or internal clearance. Pay special attention to electric motors, high temperatures, vibrations, shocks, and dusty or humid environments.
- radial, axial, and combined loads
- normal or increased internal clearance C3/C4
- operating temperature and maximum speed
- design of shields and seals, lubricant, cage material, and precision
Frequently asked questions
Can I replace a bearing with another brand?
Usually yes, if the design type, dimensions, internal clearance, precision, cover and seal design, load capacity, and allowable speeds match. The basic number alone is not enough; the meaning of the suffixes may vary according to the manufacturer.
How do I determine the diameter of the inner bore from the model designation?
For many common metric bearings, the bore diameter code from 04 is multiplied by five: for example, 04 = 20 mm and 06 = 30 mm. Codes 00 to 03 and some special designs have different rules, so it is advisable to verify the dimension.
Is 2RS better, or 2Z?
Neither is universally better. 2RS usually protects better against dirt and moisture, while 2Z tends to have lower friction and allows higher speeds. The right choice depends on the application.
What to send if the type designation is unreadable?
A photo of both sides, dimensions d × D × B, machine type, and information about speed, load, temperature, humidity, or dustiness. The more operational data we know, the more safely a replacement can be recommended.
Not sure about the replacement?
Send the type designation, dimensions, or a photo of the original part. We will help verify the suitable version before ordering.