Bearing - 6305 2RS TIMKEN

Not rated Rating details
€5,55 / pcs €4,59 excl. VAT Measure price:
In stock (216 pcs)
Delivery to:
17. 11. 2026
Delivery options
Quantity discount
1 - 4 pcs
€5,55 / pcs
5 - 9 pcs = discount 3 %
€5,38 / pcs
10 - 24 pcs = discount 6 %
€5,22 / pcs
25 - 49 pcs = discount 9 %
€5,05 / pcs
50 and more pcs = discount 12 %
€4,88 / pcs
You save €0

6305 2RS TIMKEN is a single-row deep groove ball bearing with contact seals on both sides. Dimensions d × D × B are 25 × 62 × 17 mm.

Detailed information

Product detailed description

6305 2RS TIMKEN is a single-row deep groove ball bearing with contact seals on both sides. Dimensions d × D × B are 25 × 62 × 17 mm.

Dimensions and design

  • Designation: 6305 2RS TIMKEN
  • Type: Single-row deep groove ball bearing
  • Bore diameter d: 25 mm
  • Outside diameter D: 62 mm
  • Width B: 17 mm
  • Closure: Contact seals on both sides (2RS)
  • Basic dynamic load rating C₁: 20.6 kN
  • Basic static load rating C₀: 11.2 kN
  • Limiting speed – grease: 8000 min⁻¹
  • Limiting speed – oil: 17000 min⁻¹
  • Maximum shaft fillet radius: 1.1 mm
  • Internal clearance: Normal C0 radial clearance
  • Bearing material: 52100
  • Lubricant: Standard industrial grease
  • Catalogue bearing mass: 0.22 kg

Construction and function

Balls rolling between the inner and outer rings primarily carry radial loads; the deep groove design also accommodates axial loads in both directions.

The 2RS seals contact the mating surface, limiting lubricant leakage and contamination entry. Contact sealing adds friction and differs from metal shields. Do not remove or damage the seals during mounting.

The bearing material is listed as 52100. A two-piece riveted steel cage maintains ball spacing. Standard industrial grease is specified for this variant; no particular filling quantity is stated here.

Lubrication and operation

Limiting speed is 8000 min⁻¹ with grease. The separate catalogue oil figure of 17000 min⁻¹ is not an instruction to replace the grease with oil. Operating speed also depends on load, temperature and heat dissipation. Normal radial clearance C0 is distinct from static load rating C₀; the similar notation does not denote the same quantity.

Mounting and replacement selection

The 25 mm bore d locates on the shaft, the 62 mm outside diameter D fits the housing seat and B of 17 mm is the overall width. Apply mounting force directly through the ring being fitted, not through the balls. When replacing the bearing, compare the full designation 6305 2RS TIMKEN, adjoining shoulders and machine operating requirements.

The shaft shoulder fillet radius must not exceed 1.1 mm. This is the maximum fillet of the mating shaft, not a width designation or minimum bearing chamfer.

Additional parameters

Category: Single row ball bearings, Bearings 25 × 62 × 17 mm
Weight: 0.24 kg
EAN: 087796293915
Inner diameter d (mm): 25
Outer diameter D (mm): 62
Width (mm): 17
Designation: 6305 2RS TIMKEN
Type: Single-row deep groove ball bearing
Bore diameter d: 25 mm
Outside diameter D: 62 mm
Width B: 17 mm
Closure: Contact seals on both sides (2RS)
Basic dynamic load rating C₁: 20.6 kN
Basic static load rating C₀: 11.2 kN
Limiting speed – grease: 8000 min⁻¹
Limiting speed – oil: 17000 min⁻¹
Maximum shaft fillet radius: 1.1 mm
Internal clearance: Normal C0 radial clearance
Bearing material: 52100
Lubricant: Standard industrial grease
Catalogue bearing mass: 0.22 kg

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field

We can source almost any TIMKEN product, even if you cannot find it in our online shop.

Send us the product designation and quantity required. We will check the price, availability and delivery options.

Enquire about TIMKEN products

TIMKEN – Product range and selection

The TIMKEN range includes, for example: ball bearings, cylindrical and spherical roller bearings, tapered roller bearings, bearing units.

Examples from our catalogue

  • 32208 TIMKEN
  • 22308 CJW33 TIMKEN
  • 33014 M TIMKEN

What to include in your enquiry

  • The full product designation, including all suffixes and specifications.
  • The quantity required and, if relevant, when you need the part.
  • Nameplate details, dimensions or a description of the application if the designation is unknown.

You can email a photo or drawing to info@Loziska-Policka.cz.

Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.

Choose TIMKEN bearings by the complete designation and the components required. Distinguish a complete bearing from a separately supplied component before requesting a quotation.

Specify the complete bearing arrangement

For a tapered roller bearing, include the cone and cup references where specified. For other bearing designs, preserve the complete marking and suffixes. Add the required quantity and dimensions of the original part.

Is one ring reference enough for a complete set?

Check the supplied components against the original specification. A reference may identify only one component, so a complete set must not be assumed. Send photographs of both ring markings if the information is incomplete.

Request a TIMKEN quotation · Select bearings by designation or size

Availability and any replacement will be confirmed for the specific item.

Manufacturing company : Timken Europe
Address : 2 Rue Timken, 68002 Colmar Cedex, France