Bearings 25 × 62 × 17 mm
Product sorting
List of products
Bearing - 6305 2ZR ZVL
25 × 62 × 17 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Suitable for radial and moderate axial loads in both directions, combining low friction with protection of the lubricant from larger contaminants.
Bearing - 6305 2RS ZKL
25 × 62 × 17 mm. single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and moderate axial loads in both directions while protecting the rolling elements from dust, contamination and lubricant loss.
Bearing - 6305 2Z C3 GJN SKF
25 × 62 × 17 mm. Single-row SKF Explorer 6305-2Z/C3GJN deep groove ball bearing with non-contact sheet-steel shields on both sides and C3 radial internal clearance. The grease-lubricated design is suitable for high rotational speeds.
Bearing - 6305 2Z ZKL
25 × 62 × 17 mm. Single-row deep groove ball bearing with non-contact metal shields on both sides. It carries radial and limited axial loads in both directions; the shields retain lubricant while maintaining low friction.
Bearing - 6305 ZKL
25 × 62 × 17 mm. single-row deep-groove ball bearing in an open design. For radial loads and limited axial loads in either direction.
Bearing - NJ 305 NA P6 ZKL
25 × 62 × 17 mm. single-row cylindrical roller bearing with high radial capacity, axial guidance in one direction and increased P6 accuracy. The NA design uses matched, non-interchangeable rings.
Bearing - 6305 2RS TIMKEN
25 × 62 × 17 mm. single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.
Bearing - 6305 2ZR FAG
25 × 62 × 17 mm. is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds. The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.
Bearing - 6305 2RSR FAG
25 × 62 × 17 mm. is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants. Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.
Bearing - 6305 F-HTO SKWC GERMANY
25 × 62 × 17 mm. deep-groove ball bearing is a single-row bearing in dimension series 63 for a 25 mm shaft. It carries radial loads and moderate axial loads in both directions and suits accurately aligned, smooth-running rotating assemblies. F-HTO is a manufacturer-specific variant code; verify its exact meaning and operating parameters against the original bearing or technical documentation….
Bearing - 6305 2ZC3 SKF
25 × 62 × 17 mm. deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.
Bearing - N 305 ZKL
25 × 62 × 17 mm. Single-row cylindrical roller bearing for high radial loads and accurate shaft guidance. The N design permits axial displacement of the shaft relative to the housing in both directions; when replacing, compare the complete designation and required internal clearance.
Bearing - 1305 HARP
25 × 62 × 17 mm. HARP bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 6305 N ZVL
25 × 62 × 17 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 6305 K DKF
25 × 62 × 17 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
