20 47 14
-
Bearing housings
-
Track rollers with bearings
-
Bearing balls
-
Needle rollers
-
Bearing rollers
-
Needle roller cages
-
Bearing seals
-
Inner rings
-
Outer rings
-
Bearing rings
-
Withdrawal sleeves
- 20 26 12
- 20 26 16
- 20 26 18
- 20 26 20
- 20 32 16
- 20 32 20
- 20 32 45
- 20 32 7
- 20 35 10
- 20 35 16
- 20 37 17
- 20 37 23
- 20 37 9
- 20 47 18
- 20 47 20
- 20 47 31
Product sorting
List of products
Bearing - 6204 2RS ZVL
20 × 47 × 14 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 6204 2RS C3 SKF
20 × 47 × 14 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; C3 means greater radial internal clearance, so verify suitability.
Bearing - 6204 2RS SKF
20 × 47 × 14 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 6204 2RS BBC
20 × 47 × 14 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Bearing - 6204 2RS CX
20 × 47 × 14 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 6204 2RS MTM
20 × 47 × 14 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 6204 2RS CRAFT
20 × 47 × 14 mm. Rubber seals on both sides.
Bearing - B7204 C T P4S UL FAG
20 × 47 × 14 mm. FAG B7204-C-T-P4S-UL super-precision spindle bearing with a 15° contact angle, textile-phenolic cage and universal matching for light preload. Designed for precise high-speed spindle arrangements.
Bearing - 6204 2Z CX
20 × 47 × 14 mm. single-row deep-groove ball bearing with non-contact metal shields on both sides for lubricant protection and low friction.
Bearing - 6204 2ZNR SKF
20 × 47 × 14 mm. deep-groove ball bearing is a single-row radial bearing with non-contact metal shields on both sides. It supports radial loading and moderate axial forces in either direction. The 2Z shields help retain lubricant and keep out coarse contaminants while maintaining low friction and suitability for higher speeds. The outer-ring groove and supplied NR snap ring provide straightforward axial….
Bearing - 6204 2ZR FAG
20 × 47 × 14 mm. FAG bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 6204 C3 KINEX
20 × 47 × 14 mm. deep-groove ball bearing is an open single-row bearing with greater-than-normal C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and suits arrangements where interference fits or operating temperatures reduce internal clearance.
Bearing - 7204 AA ZKL
20 × 47 × 14 mm. single-row angular-contact ball bearing is designed for combined radial and axial loads. Under the ZKL designation system, the AA execution has a 26° contact angle and carries axial load in one direction.
Bearing - S 6204 C TA P4 GMN
20 × 47 × 14 mm. Higher accuracy class P4 High-precision spindle ball bearing for precision arrangements carrying combined radial load and axial load in one direction. The complete C TA P4 design, pairing and required preload must be preserved when replacing it.
Bearing - 6204 2RS SS CODEX
20 × 47 × 14 mm. Rubber seals on both sides.
Bearing - 1204 DKF
20 × 47 × 14 mm. bearing with the verified designation. Compare the complete designation, dimensional data and design with the original part. Confirm suitability for the specific bearing arrangement in DKF documentation.
Bearing - 1204 MGK
20 × 47 × 14 mm. CT CT bearing with the verified designation. Compare the complete designation, dimensional data and design with the original part. Confirm suitability for the specific bearing arrangement in CT documentation.
Bearing - 1204 K ZKL
20 × 47 × 14 mm. ZKL 1204 bearing with the verified designation. Compare the complete designation, dimensional data and design with the original part. Confirm suitability for the specific bearing arrangement in ZKL documentation.