Bearings 45 × 100 × 25 mm
Bearings measuring 45 × 100 × 25 mm. Choose a specific design from the products below. Matching dimensions alone do not ensure interchangeability.
Product sorting
List of products
Bearing - 6309 2RS KINEX
45 × 100 × 25 mm. single-row deep-groove ball bearing with rubber seals on both sides. For radial loads and limited axial loads in either direction.
Bearing - 6309 2RS1 SKF
45 × 100 × 25 mm. SKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 1309 ZKL
self-aligning ball bearing, cylindrical bore; d=45 mm; D=100 mm; B=25 mm; Cr=39.1 kN; C0r=12.8 kN; Pu=0.58 kN; ngrease=6 300 min−1; noil=7 500 min−1.
Bearing - 6309 2RSR KINEX
45 × 100 × 25 mm. Rubber seals on both sides.
Bearing - 1309 URB
45 × 100 × 25 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 1309 K ZKL
45 × 100 × 25 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 7309 BECBM SKF
45 × 100 × 25 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Choosing the right bearing
The dimensions are bore diameter d = 45 mm, outside diameter D = 100 mm and width 25 mm. Depending on the design, manufacturers may label width or height B, T or H; for tapered roller bearings, distinguish overall width T from ring widths B and C. Before ordering, compare the full designation, including suffixes, bearing design, seals or shields, internal clearance and the requirements of your bearing arrangement. If you are unsure, send us the full designation and, if available, a photograph of the original part.